Peaty's Monarch Grip Lock Ring
Monarch Grip Lock Ring
MTB Grip Locking Ring (1 Set Left and Right for Monarch Grip Only

Peaty's Monarch Grip Lock Ring is a replacement grip lock ring made specifically for Monarch Grips.

Available in 12 rich color options.

The lock ring body is made of 6061 aluminum. No need to worry about peeling or rusting your head.
3mm stainless steel allen key bolts pre-installed.
Bolt torque is up to 3nm.

The PEATY'S logo is laser etched on the end of the grip as a mark to properly set the grip offset.

Features:
Left and right set (2 pieces).

The lock ring body comes with 0.1 inch (3 mm) hex bolt.

Slim lock ring with 0.3 inch (8 mm) width to maximize grip area.

6061 Aluminum Locking Ring and Stainless Steel Bolts

12 color options

Each clamp is marked on the left and right (L, R).

Environmental packaging. Cardboard backboard, paper lock wire

Installation Method:
1. Loosen the 3mm allen key on the lock ring.
2. Remove the monarch grip from the bar and remove the locking ring.
3. Reinstall the new clamp and use the L and R marks engraved on the Allen key to ensure the correct side is attached to the correct grip.
4. When installed correctly, the flat edge of the lock ring will touch the rubber of the grip and the Allen key will point the rider.
5. Reinstall the grip according to the installation instructions on the grips.
~Installation is Complete~ What is Monarch Grip? ]
Monarch Grip is the crystals of Peaty's that have been hard stuck to handlebars for decades.

At Peaty's we have tested countless different compounds and grip pattern combinations for the ultimate grip, fine-tuning and testing.
Take a look at the thoughtful design to give your Monarch Grip the grip the perfect grip for the King of Control.

Monarch grips have two textures (textures) Mushroom and Knurl
From the trail cruisers seeking comfort to the big hitter who wants to cushion the impact of hard rock gardens and flat landings, this mushroom is recommended for any rider.
The mushroom texture is named from a shape that looks like a folds on the back of the mushroom.
For decades of BMX grip, the mushroom texture folds have been spaced equally spaced with the same width gaps.
This structure allows the folds to convey the next space when compressed by hand.
It provides a softer, more flexible feel and shock absorbing texture compared to Narl Texture.

A highly maneuverable grip that is suitable for racing control. Recommended for racers who prefer aggressive feel, precise control, and solid texture.
Narl is excellent in racing control.
Narl Texture has been used as a grip texture on tool handles for over 100 years.
Each rhombus and sharp prongs shape creates sharp points and provides grip.
Compared to mushroom textures, the shallow texture provides a sturdy base for increased reliability and control of feedback.

There are also 2 thickness options for each option: Thin or Thick.
The Thin grip has an inner diameter of 1.2 inches (30 mm), an outer diameter of 1.3 inches (32 mm), and a thick grip is 1.3 inches (34 mm).