Easy Connect remote control to electric skateboard:
Suitable for most electric motor systems, Firstly, turn on the power of the scooter, then press and hold the scooter power button for 3 seconds. After the scooter indicator light flashes once every 0.5 seconds, the scooter enters pairing mode. Then turn on the power of the remote control. There is a hidden button on the back of the remote control. Press it once to release it. The first light on the remote control will flash. At this time, pairing is successful.
Power on the remote control:
Press and hold the Power button for 3 seconds to turn it on, and the display lights up.
Remote control shutdown:
Press and hold the power button for 3 seconds
Remote control automatic shutdown:
If the remote control is not connected to the scooter, it will automatically shut down in 30 seconds. If the remote control and the scooter are connected, it will not automatically shut down. You must wait for the scooter to shut down after the scooter has no connection for 30 seconds and then shut down.
Unit switching:
When the remote control is turned off, press and hold the No. 1 and No. 2 buttons to display the menu interface, press the No. 2 screen arrow to move up and down, move to UNIT: KM/H MPH, and the wave wheel switches between kilometers and miles.
Wheel speed display adjustment:
When the remote control is turned off, press and hold the No. 1 and No. 2 buttons to display the menu interface. Press the No. 2 screen arrow to move up and down, and move to WHEEL SPEED: 64. The 64 digits behind are to adjust the speed and mileage displayed by the remote control. , the larger the number, the higher the display speed per hour, the smaller the number, the lower the display speed per hour.