مميزات خاصة

【Compatible Drones】Our repair component gimbal damping rubbers are specifically and accurately designed for DJI Mini 4 Pro drones. It also can be used on DJI Mini 3 Pro and DJI Mini 3 drones, their only difference is the color but size and structures are the same.
【DIY Repair】When your drone falls off from the sky or hit obstacles during flight, it may break the gimbal vibration damping rubbers and make your gimbal unsteady/not working. Sending your drone to repair shop or after-sale center is very time-consuming and also quite expensive, why not choose our cost-effective product and save your drone in several minutes? We've inlcuded the right parts and repair tools and ready for your DIY repair!
【Repair Instructions】Our rubber dampers have the extended tails which can be put through those mount holes on the drone body very easily. If you only want to replace the left gimbal rubber, you need to open the side cover on the left with our spudger and remove the damaged rubber, then mount our left rubber(the one with 3 holes) on the pitch motor firstly and finally insert the 3 tails through the holes on the drone body, cut off the long tails in the end and install back the side cover. If you also need to replace the right gimbal rubber, you have to remove the gimbal from the drone body, check more steps on our photo illustration.
【Additional Remind】Although the gimbal rubbers replacement sounds like a quite easy job, it is also highly suggested that watch some online tutorials or videos, especially for DIY beginners, before the repair. You will find a lot of videos online and after that you will be more knowledgeable and confident in reparing your drone.
【Packing List】1 pair of gimbal rubber damprs (left+right), 1 x T5 screwdriver, 1 x spudger, 1 x tweezer

وصف

When your Mini 4 Pro gimbal is tore off, it means that your need to change the gimbal rubber dampers.

Our replacement rubber dampers include one set: left and right side, with very good quality. Also a set of repair tools are included.

If you just need to replace the left side rubber( the side without gimbal wires coming through), you do not need to open the drone shell. If the right side rubber is also tore off, you have to open the upper shell of the drone and remove the gimbal siginal cable from the drone core board, then replace the right side rubber.

Please note the left rubber damper is the one with 3 holes and the right side damper is the one with 4 holes. And each hole should be mounted accordingly with the bumps on the gimbal bearings, check more on our illustration photos.

Compatibility: DJI Mini 4 Pro, also can be fit with DJI Mini 3 and DJI Mini 3 Pro(their only difference is the color.

مرحبًا،

بحث

زوج واحد من مخمدات مطاطية من iMusk لأجزاء ومكونات إصلاح طائرات DJI Mini 4 Pro بدون طيار، تتضمن أدوات الإصلاح

مميزات خاصة

وصف

منتجات شبيهه