Motor Drives
18V-60V 15A Motor Driver Brushless Speed Controller ZM-6618 For Below 900W BLDC Motor
Instruction:
ZM-6618 brushless motor driver, is a high-performance BLDC controller (driver) developed by our company based on the latest BICD process integrated circuit. It has the characteristics of small volume, low heating, high reliability, long service life and easy to use.
Note:
this product belongs to professional electrical equipment and should be installed, debugged, operated and maintained by professional technicians. Incorrect use will lead to electric shock, fire, explosion and other hazards
this product is powered by power supply. Please confirm that the positive and negative poles of the power supply are correct before power on
the phase line and hall line of the brushless motor must be completely connected to the driver before it can be powered on, otherwise the driver may be burned due to excessive current
do not and unplug the connecting cable with power, and there is no cable short circuit during power on, otherwise the product will be damaged
if the direction of the motor needs to be changed during operation, the motor must be slowed down to stop before changing the direction
the driver is not sealed. Do not mix conductive or corrosive foreign matters such as screws and metal chips inside. Please pay attention to moisture and dust during storage and use
the driver is a power equipment, and try to maintain the heat dissipation and ventilation of the working environment
Feature
high integration and high reliability brushless (BLDC) motor controller
three phase full bridge, PWM square wave drive control
overcurrent protection measures: in case of overload, turn off the output immediately and protect the motor in time
pure hardware design, high speed, high anti-interference ability
wide range voltage compatible with dc12-60v
low heating and high power
Function:
Undervoltage ( 15V)automatic protection and over-voltage 60V
Stall protection time adjustable 0/1/3/10 seconds, standard 1s
Hall error protection
automatic shutdown output in 3 seconds of locked rotor
Support for built-in potentiometer, external potentiometer, analog voltage and PWM speed control
With enabled function
With speed feedback signal output
With EABS electronic fast braking function
* With a slow start function, to avoid current overshoot, the effective protection of the motor
Specifiction
V-: Ground of external speed adjuster (COM side)
Ve: external speed signal, connect to external potentiometer, analog voltage or PWM
V+:positive of external potentiometer speed adjuster , hang in the air when not use. (Internal 5V output, Maximum output 200mA)
L1: Power light Power indicator, long green after power on.
L2: alarm light
SW1: switch of internal and external speed regulation. ON: internal OFF: external
SW2: switch of enable function. ON: high lever/hang in the air standby. OFF: low level standby.
when the code SW2 is on, low lever, it work; High level or Hang in the air standby.
Positive / negative: power input, 18-60V
U, V, W: drive output, connect the motor phase line
H +, H- :Hall power supply, then the motor Hall power cord (maximum output 100mA)
Hu, Hv, Hw Hall signal, then motor Hall signal line
FG: speed feedback signal (output duty cycle 50% square wave)
ER alarm output (between alarm and V-)
: Reserved port, no function
DR: direction, floating or high level is forward, low level reversal
EN:Enable, when the dial SW2 is off, Hang in the air or high level, it work; Low level standby.
brushless driver*1
==========
Power Supply :
Model Number : ZM-6618
Motor Type : Motor