Motor Drives
ZM-6608 Brushless Driver 8A 12-60V For 180W Brushless Motor
Features:
1. Highly integrated and highly reliable BLDC motor controller
2. Three-phase full bridge, PWM square wave drive control
3. Overcurrent protection measures, turn off the output immediately when overloaded and protect the motor in time
4. Pure hardware design, high speed, high anti-interference ability
5. Wide voltage compatible with DC12-60V
6. Low heat and high power
The main function:
1. Undervoltage (12V), overvoltage 60V
2, automatic protection for 3 seconds
3. Hall error protection
4, output 8A, over current shutdown output
5. Support built-in potentiometer, external potentiometer, analog voltage and PWM speed regulation
6. With the function of enabling reversal, it can flexibly cooperate with the normally open and normally closed control systems
7. With slow start function, to avoid current overshoot, effectively protect the motor
8. Slow start time multi-level customization (0S, 1S, 3S, 10S) default 1S
Interface definition:
Positive / negative: power input, 12-60V
U, V, W: drive output, connect to motor phase line
Hu, Hv, Hw: Hall signal, connect the motor Hall signal line
H +, H-: Hall power supply, connect the motor hall power line (maximum output 100mA)
V +: The positive electrode of the external potentiometer for speed regulation, suspending when not in use. (Internal 5V output, maximum output 200mA)
Ve: External speed control signal, can be connected to potentiometer, analog voltage or PWM
V-: External speed reference ground (COM terminal)
EN: enabled, when the dial code SW2 is off, it is normal when it is floating or high level, and the low level is standby.
DR: direction, forward rotation when floating or high level, low level reverse
Power light: Power indicator, green, long light after power on
RJ1: Current limit setting, optional according to customer requirements.
RJ2: Internal speed-adjustable potentiometer, rotate clockwise, motor speed from 0-100%
SW1 dial code: internal and external speed switch, ON: internal OFF: external
SW2 dialing code: enable function switching, ON: high level floating for standby, OFF: low level standby
Dimensions:
Driver *1
==========
Power Supply :
Model Number : ZM-6608
Motor Type : Motor