How to install the interface
Step 1:Use the included tube cutter to cut the tube to the desired length, rotating it up and down as you cut
Step 2:Bevel the inside of the tubing by inserting the reaming tool and rotating it at least 3 full turns Use peg for 3/4” tubing.
Step 3:Remove the nut and split ring from 3/4" tubing fitting, then put the nut and split ring on tubing.BorutO-Ring Insert the fitting into the tubing
Step 4:Turn the nut until it is hand-tight,put a reference mark on the nut and fitting body,tighten nut with wrench a minimum 3/4 of a turn or until tight