مميزات خاصة

SUPERIOR NON-SLIP: Cup holder inserts adopt a rounded raised design that snaps tightly around the water cup. Whether you are braking sharply or making a sharp turn, the cup can firmly “stand firm” and no longer sway from side to side or tip over and spill
UPGRADE ADHESIVE BACKING: The new build adhesive design, adhesive backing from a circle upgraded to this base are adhesive backing, greatly increasing the installation area, improve firmness, do not worry about the use of the case will fall off
PROTECT: Soft texture, cupholder insert for car can effectively avoid direct friction between cup and cup holder, prevent the bottom of the cup from being scratched, wear and tear, so that the beloved cups are always clean and fresh as new
FLEXIBLE ADAPTATION: The car cupholder insert fits cups of all shapes and sizes. Whether it's a round thermos, a slim sports bottle, or a chunky coffee mug, it fits easily into the car cupholder, suitable for most cars/trucks/vans/SUVs, etc
INSTALLATION: 1. Be sure to clean and keep the dry placement position before installation. 2. Install for 24 hours before use. 3. Install with the small end facing upwards. 4. Check the product description for specific installation matters and steps

وصف

SAY GOODBYE TO WATER GLASS SHAKING AND CONCENTRATE MORE ON DRIVING

Product Attributes
Colors: Black
Sizes: 1.20×1.20×0.44 inch
Weight: 0.59 oz
Material: Silicone
Packaging: 6* Car Cup Holder Insert + 1* Installation Package + 1* Instruction Manual

Product Feature & Functions
1. High elastic silicone material, firmly lock the water cup, sharp brakes and turns will not fall down
2. Soft silicone structure, effectively absorb driving vibration, protect the cup from collision

Installation Steps
1. Clean the surface of the paste position with a cleaning sheet, so that the surface is dry and free of stains, oil, water, dust, etc
2. Tear off the protective film of cup holder insert for car
3. Stick it to the lower center of the inner side of the water cup holder, with the small end facing upwards
4. Press firmly several times, the installation is complete, 24 hours before use

Must See Before Installation
1. This car drink holder insert installs the quantity according to the situation. The number of car drink holder insert can be judged according to the space where the cups are placed in the sink
Suggestion: 2 slots with different number of inserts, one with 1-2 inserts, one with 2-3 inserts
Cup wall and the inner wall of the water cup slot space is small paste 1-2, the space is slightly larger paste 2-3 quantity
Generally put insulation cups and other thick diameter cups, water cups in the slot 1-2 sticker
Put mineral water or coffee and milk tea cups and other thin cups, a water cup slot paste 2-3 limiters
2. Installation position in the middle of the cup slot downward position, it is recommended to install by the lower position
3. After affixing it, press it hard for 24 hours and then try to put the cups, the longer the better, the better the double-sided adhesive
4. Affixed, do not use your hands to buckle to see if it will not fall, buckle hard is able to buckle off

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه