Motobatt has designed a battery that is a perfect balance between Ignition and Power Supply. Compared with older machines when the battery only had to start the engine and operate some low wattage bulbs, we now have a situation where Amp draw at Ignition and during operation has increased dramatically. Also the battery is cycling deeper and constantly. Hence the requirements for a battery that can retain CCA under higher load conditions as well as “cycle”. Motobatt MBRC1 Lead Acid and Lithium 1.0 Amp 4 Step Charger is an all in one Rapid Charger which can charge any powersport battery no matter what the chemistry. The RC1 is both innovative and advanced with optimized efficiency and safety features. All Powersports ride and maintain situations. A highly versatile charger that will charge Wet (flooded), GEL, MF, EFE, AGM, and Lithium batteries up too 32 Amp Hours with maintenance up to 100 AH. Battery Type - MBT6N4 Voltage - 6V Capacity (10HR) - 4Ah Weight - 0.73kg / 1.61Ibs Dimensions (in / mm) - L: 2.80(71) W: 2.80(71) H: 3.80(96) Assembly Figure Terminal Locations - 2 Terminals - 2, Wires Terminal Cable Adaptors- MP6NC3, MP6NC4, MP6NC7, MP6NC8, MP6NC9, MP6NC10, MP6NC11, MP6NCD