Specification:
Type: Cluster Clock Adjuster Fix Part
Material: Nylon
Color: Black
Tested temperature range: -30°C to 100°C
Unit of Measure: km/h, mph

Fitments:
For BMW E46 3 series clock adjuster repair part for all modell (1998-2006)

Installation guide:
1.Remove the cluster from your car
2.Remove 4 torx screws with a T8 screwdriver from the back
3.Pull off the top, rubber black black adjuster needle
4.Remove the back of the cluster
5.Remove the black adjuster needle
6.Remove the residuals of the original, white adjuster levers with a scalpel/papercutter
7.Put the end tip of the fixture below the edge of the cluster and push down the whole fixture with your fingertips/screwdriver. Please pay attention the ring of the fixture is around the white round stuff on the cluster
8.Put back the black adjuster needle and assemble the cluster

Package Included:
1 Set Cluster Clock Adjuster Fix Part