Kit Includes: (1) Wilwood Single Clutch Pedal - Floor Mount. (1) Speedway Clutch Master Cylinder - 3/4" Bore. (1) Speedway Push-Type Clutch Relese Slave Cylinder. (1) Speedway Pushrod for Slave Cylinder. Wilwood Single Clutch Pedal - Floor Mount This lightweight aluminum floor mount pedal assembly from Wilwood mounts a single brake or clutch master cylinder in the forward position outside the firewall. This pedal assembly features a high strength reinforced I-Beam style forged 6:1 ratio pedal arm and non-skid waffled pedal pad that can be laterally adjusted for your preference or clearance. This pedal will accept any Wilwood vertical mount flange single or tandem outlet master cylinder. Lightweight aluminum fCompatible with Rame. 6:1 ratio. Floor mount. Speedway Clutch Master Cylinder - 3/4" Bore Small Speedway master cylinder for clutch applications. Lightweight, space-saving alternative to full size master cylinders. Fits popluar clutch and small brake applications. 3/4" Bore. 3/8"-24 inverted flare fitting included. 1.4 oz. reservoir. 5/16"-24 thread pushrod. Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. Speedway Push-Type Clutch Release Slave Cylinder Push type slave cylinder with 7/8" bore size. Has approximately 1.25" of travel. Inlet fitting that comes on the cylinder is 3/8 x 24 IFF. Has 2-3/8" mount bolt centers. Overall Length: 3.243" Overall Thickness: 1.221" Centerline of Holes: 2.38" Bore Size: .875" Thread Pitch: 1/8" NPT. Finish: Anodized. Material Type: Aluminum. Note: If you want to plumb AN3 or AN4 lines, order 1/8 NPT to AN3 or AN 4 in either straight, 45 degree, or 90 degree and remove the fitting that comes installed. Speedway Pushrod for Slave Cylinder Replacement adjustable pushrod for push-style slave cylinder, 91025605. Diameter Big End: 0.490" Diameter Small End: 0.3680" Max. Mounting Distance: 7.00" Min. Mounting Distance: 6