Fitment
for Nissan
for Murano 3.5L 2005-2007

Item Offered
Items Included: Mounting Hardware
Kit Parts Included: Sway Bar,Outer Tie Rod,Inner Tie Rod

Position
Location: Left,Right,Front

Part Number
54618CK000,EV800047,K80256,54618CA000,54668CA000,54668CK000,K80255,ES800046

Ball Joint Frequently Asked Questions
(1).Do I Need to Replace the Control Arm If the Bushings Are Worn
(2).What Happens If a Ball Joint Breaks
If the Ball Joint Breaks Completely,It Can Be Separated,and Things Can Turn Sour Quickly. the Wheel Will Stop Being Nice and Can Even Steer You off the Road. It Can Be Serious
(3).What Happens If I Don'T Replace Ball Joints
(4).Do I Need to Grease New Ball Joints
(5).Why Should I Get My Tie Rods Inspected on a Basis
(6).Vibrations
(7).Shaking
(8).Wandering
(9).What Are the Symptoms of a Bad Sway Bar
(10).What Happens When a Sway Bar Breaks

Tie-Rod End Replacement Guideline
This Useful Tip Applies to the Exchange of Tie Rod Ends and Inner Tie Rods,Which Together Form the So-Called Tie RodLift the Vehicle and Dismount the Front Axle Wheels
Dismount the Front Underride Guard
Push the Bellow Towards the Tie Rod End
Screw the New Inner Tie Rod Into the Rack and Tighten It with the Tightening Torque That Has Been Specified by the Vehicle Manufacturer
Secure the Ball Joint in the Steering Knuckle and Mount the Nut. Please Observe the Tightening Torque Suggested by the Vehicle Manufacturer
14.Mount the Front Underride Guard