Product Name: Knuckle Strut Removal Tool
Features:
- The set includes a strut spreader tool with an expansion range of 5 - 12.5mm. Driver: Outside hexagon 17mm adjustable wrench, hexagonal socket or open wrench. Another 2 shock absorber sockets, sized at 5x7mm and 5.5x7mm respectively, with a driving force of 1/2 inch drive ratchet.
- It is quick and easy to remove and replace the strut unit in the front axle use this socket, when replaced the struts or shocks, and very easy to knock it out of the spread position, makes removal suspension strut much easier.
- It is made of chrome vanadium steel, featuring high hardness, high load capacity and with extreme toughness, this spreader socket will not yield under high torque applications.
- This strut spreader tool is designed to be as low profile as possible, allowing it to fit in tight spaces, thus making your job much easier. It separates the suspension strut from the wheel bearing seat by being stuck in the gap, and only needs to rotate the outer hex to separate it, easy to operate.
- Suitable for most vehicles fitted with clamping bolt-on hubs, our strut spreader sockets is the ideal removal tool for automotive, which is fit for Audi VW BMW and other most of brands.

Strut Spreader Tool Usage Steps:

- Put the strut spreader tool in the middle of the shock absorber strut.
- Use a 3/8 Inch drive ratchet/adjustable wrench to rotate and allow the gap to widen.
- Finally, turn the wrench in the opposite direction to remove the tool. Strut spreader socket Usage Steps:
- Carefully insert the tool into the indicated position.
- Then, rotate the tool 90° in the direction indicated.
- Proceed to the next step, which is to remove the shock absorber.
Package Include:

1 x Strut Spreader Tool
1 x 5.5 x 8mm Strut Spreader Socket
1 x 5 x 7mm Strut Spreader Socket