Item Type:General Transmission RS800 Axle Seal
OE:587086401 590100301 21549029 GT41857
Material:Rubber
Color:Black
Why choose this item:Is the transmission leaking oil and being invaded by impurities causing frequent wear and tear of components? General Transmission RS800 Axle Seal features super strong sealing, wear-resistant and temperature-resistant properties. It tightly locks the lubricating oil and isolates dirt, prolonging the service life of the transmission and ensuring the transmission system operates stably and continuously!
Installation method:
1.Empty the transmission fluid: Locate the drain bolts of the transmission and use the appropriate tool to unscrew it. Then, pour the fluid inside the transmission into a suitable container. Ensure that all the fluid has been completely drained before reinstalling and tightening the drain bolts.
2.Remove related components: Based on the specific structure of the vehicle, remove the components related to the axle seal, such as wheels, brake system components, transmission shafts, etc. This may require the use of various tools to loosen bolts and nuts and carefully remove the components from the axle. During the removal process, pay attention to recording the installation positions and sequences of each component to facilitate correct installation in the future.
3.Remove the old seal: Use an oil seal puller or other tools to carefully remove the old General Transmission RS800 Axle Seal from the axle. Be careful not to damage the surface of the axle or the sealing seat on the transmission housings. If the seal is installed tightly, you can use some appropriate methods, such as heating the transmission housings or using specializeds disassembly tools, to assist in the disassembly, but be careful of the safety of the operation and the protection of surrounding components.
4.Clean the installation area: Use a clean cloth or solvent to thoroughly clean the surface of the axle and the sealing seat on the transmission housings, removing oil stains, dust, impurities, and old sealant, etc. Ensure that the installation surface is clean and smooth, without scratches or damages. If scratches or damages are found, they may need to be repaired or ground to ensure the good installation and sealing effect of the new seal.
5.Install the new seal: Apply an appropriate amount of transmission fluid or specializeds seal lubricant on the lips and outer circumference of the new General Transmission RS800 Axle Seal to facilitate its installation and prevent damage during installation. Then, use a suitable installation tool (such as an oil seal installation sleeve) to carefully press the new seal into the sealing seat of the transmission housings. Ensure that the seal is installed properly and fits tightly with the sealing seat without tilting or twisting. During the installation process, be careful not to subject the seal to excessive impact or damage.
6.Install other components: Install the previously removed components back in their original positions in the reverses order. Ensure that all bolts and nuts are tightened to the specified torque values, which can be obtained from the vehicle's maintenance manual. When installing components such as the transmission shaft, pay attention to the correct installation position and connection method to ensure good coordination with the axle and transmission.
7.Add transmission fluid: Add new transmission fluid to the transmission through the transmission's filler port using a suitable funnel. The amount of fluid added should comply with the vehicle manufacturer's specifications. Refer to the vehicle's user manual or maintenance manual to determine the correct filling amount. During the filling process, pay attention to the quality and cleanliness of the fluid to avoid impurities from entering the transmission.
8.Check and test: After installation, check if all components are firmly installed, and there are no loose or abnormal conditions. Start the vehicle and let the transmission operate in different gears for a period of time to check for any oil leakage. At the same time, check the vehicle's driving performance and the operation of the transmission system to ensure everything is normal. If any abnormalities are found, stop the vehicle immediately for inspection and troubleshooting.
Package Including:
2 x General Transmission RS800 Axle Seal
Q&A:
Q: Why should I replace the General Transmission RS800 Axle Seal?
A: When your equipments (such as lawn mowers, tractors, etc.) has oil leakage in the gearbox or when you notice a decline in the performance of the transmission system and abnormal noises, it is very likely that the axle seal has malfunctioned. User feedback indicates that after replacing this axle seal, the oil leakage disappears, the equipments operates more smoothly, the power transmission returns to normal, and it effectively avoids the damage to the gearbox caused by oil leakage, significantly prolonging the service life of the equipments.
Q: What kind of material is this axle seal made of and is it durable?
A: It is made of high-quality rubber. Rubber has excellent oil resistance, anti-aging properties, and good elasticity, and can maintain sealing performance in various working conditions. Many users have reported after using it for many years that the axle seal still effectively seals and has not shown any wear, deformation or leakage due to material issues, and its durability is trustworthys.
Q: How is the sealing effect of this axle seal?
A: The sealing effect is excellent. Its precise design and high-quality materials can form a tight sealing barrier between the shaft and the gearbox, effectively preventing oil leakage and blocking dust, impurities from entering from the outside. Users generally reports that after replacing this axle seal, the equipment no longer has oil leakage, and the internal cleanliness is guaranteed, and the transmission system operates more stably and efficiently.
Q: Compared with similar products from other brands, what are the advantages of this axle seal?
A; Compared with other brands, it has superior sealing performance, can withstand higher pressure and temperature changes, and ensures stable operation under complex working conditions. The material selection is more refined, and the durability is stronger, significantly reducing the frequency of replacement. The adaptability is also broader, meeting the needs of more different brands and models of equipments. Many users have commented that after using this shaft seal, the performance of the equipments has improved significantly, far exceeding that of other brands' products used before.
Note:
1.Please check the part number carefully.The product information is for reference only.
2.If you are not sure about the item, please contact us before purchase to avoid unnecessary returns, thank you!