Selector Switch
Configuration line precautions
Wiring should be fixed 5CM from the switch, the bending radius of the wire will not be less than R45CM. Be careful not to damage the wire insulation to avoid wire leakage.
Installation precautions
The shape of the cam and the positioning rod, frequency etc. will affect the service life and accuracy. Therefore, it is recommended that the angle of the positioning rod is above 30 °, and the surface roughness of the positioning rod, above, the hardness HV400-500, is set. When adjusting the stroke of the switch, the groove must be above the standard surface most corresponding position.
Multi-connection use tempering
Connection many group use of starter, up to 6 sets of switch can be connected. When connecting, the concave and convex grooves on the switch surface are matched with each other. The thickness of the other plate thickness should be more than 6 MM.
Connecting point type
Mounting hole and size
If the mounting plate is warped or lifted, it will cause poor installation. Please check the mounting plate before installing it.

Translated with www.DeepL.com/Translator (free version)
==========
Current : 5A
Material : aluminium alloy
Switch Type : MICRO SWITCH
Model Number : TZ-3104
Item Type : SWITCHES