Electronic Engine Control
DC30D Generator Controller Board Panel Small Diesel Genset Control Module
This controller series is specially designed for starting, stopping, monitoring and default value checking as well as parameter setting of small diesel, gasoline and gas generator sets.
The controller has a dot matrix screen that displays various faults simultaneously and stops the genset once it fails to work smoothly. There are Chinese/English interface options and more languages can be set according to user requirements. All parameters can be configured through the front buttons or can be adjusted through a PC using a programmable interface via USB. It can be widely used in various automatic control systems of generator sets.
Parameters: operating voltage:
DC8-36V Continuous
Power consumption: Standby: 24V: MAX 1W Working: 24V: MAX 2W AC voltage input: 1P2W
(L-N input) 30VAC-360VAC (ph-N) speed sensor Frequency: 50-9000Hz Generator frequency input: 50/60Hz
MAX Accumulated time: 9999.9 hours (Minimum storage time: 6min)
Fuel relay output:
1Amp +VE Supply voltage
Start relay output: 1Amp +VE supply voltage Programmable relay output 1: 1Amp +VE supply voltage
Programmable Relay Output 2: 1AMP non-contact normally open normally closed output Programmable Relay Output 3: 1AMP non-contact normally open output
Switching value inputs: available if connected to battery -
Insulation strength: AC1.5kV applied between high voltage terminals and low voltage terminals; leakage current not more than 3mA in 1min.
Operating conditions: -25-65°C Storage conditions: -40-85°C
Protection level: IP54: when waterproof rubber gasket is added between the controller and its panel Overall dimensions: 106mm×86mm×45mm panel
Opening: 78mm×66mm
Weight 0.25Kg