Stabilize driveline – Supports the intermediate joint in a split shaft to help maintain alignment and steady torque transfer during operation.
Verified dimensions – Typical specs include a bearing bore near 45 mm (about 1.77 in) and roughly 70 mm from bearing centerline to mounting face; confirm on‑vehicle before purchase.
Fitment reference – Commonly cross‑referenced under A6097 for 2003–2006 2500 configurations; verify bracket style, mount spacing, and bearing I.D. prior to ordering.
Service friendly – Standard procedure: mark shaft phasing, access mid‑tunnel, unfasten support, press the bearing squarely into the carrier, and torque hardware per service data.
Vibration control – A fresh isolator and bearing can address driveline shake and clunk that develop when the rubber element and bearing wear over time.
وصف
This center support bearing suits two‑piece prop shaft layouts on 2003–2006 light‑duty vehicles and is frequently referenced by code A6097. Boundary details often include a bore near 45 mm and about 70 mm from the bearing centerline to the mounting face, with a U‑style bracket. Installation involves preserving driveline phasing marks, pressing the bearing into the carrier squarely, and torquing fasteners per service specifications. Confirm inner diameter, bracket style, and mounting span against the component on the vehicle for an accurate match.