LEAPING KNIGHT Voltage Regulator Rectifier with Plug for GY6 125cc 150cc 180cc 200cc 11 Poles DC Magneto Stator Scooter Moped ATV Go Kart,
Motorcycle DC Regulator Rectifiers

Package:1x Voltage Regulator Rectifier,1x Plug

Replacement for GY6 125cc 150cc 11 Poles DC Magneto Stator.
Fit for GY6 125cc 150cc 180cc 200cc 152QMI 157QMJ Engine

Voltage Regulator Rectifier Installation and Maintenance Instructions:
1.We should install the rectifier in a location with good ventilation and good heat dissipation, because the rectifier will produce high temperature when working,
and poor heat dissipation will damage the rectifier.
2.The voltage regulator should be installed tightly on the frame to facilitate heat conduction.
3.Do not press other wires between the voltage regulator and the frame.

Installation Steps:
1.Connect the AC input line, and the positive and negative outputs are not connected.
2.Start the motorcycle and measure the positive and negative output voltages.
3.When the voltage range is reasonable, plug in the positive and negative wires.
4.Then test the voltage of the battery or the voltage of the positive and negative of the rectifier to see if it is within a reasonable range,
if the voltage range is unreasonable, stop using it and give us feedback.