Speed Controller
EG3002 Generator Speed Control Electronic Governor Diesel Genset Parts Replacement
Product Photos
Packing
Product Description:
Generator governor automatic control speed regulator EG3002.
Universal Electronic Engine Governor Controller.
Diesel generator speed control unit,engine speed module.
The EG3002 electronic controller takes a signal from a magnetic pickup(MPU) and compares it with a preset engine speed to control drive voltage to the actuator to maintain constant engine speed.The EG3002 has engine start smoke suppression,IDLE speed control,Ramp Time Setting,applixable for MPU frequency range of 600 to 9500 HZ.The unit has setting for use with High-gain(PT PUMP)engines and "extreme slow response"engines.
Suitable for diesel, gas and natural gas engines with Built-in & NonBuilt-in PTs Pumps,in PTs Pumps, also can be used with Low
Current, Electric over Hydraulic Oil Pumps Type Governor Actuators.
Features
. Works on a wide ranges of MPU/flywheel frequencies
. 15 Amp Max Output
. Suitable for all types of diesel and Gas engines
. High Sensitivity and stable at Low Frequency Variations
. Moisture, vibration, and rust protected, Epoxy encapsulated electronics
. For Use With Isochronous Generators & Automatic Paralleling controls
Idle Speed Adjustment and connections for a Remote Speed POT
SECTION 2:SPECIFICATION
Operating Voltage(Terminals 1,2)
Speed Droop
Voltage 10-32vdc
0-4% (adjustable)
Outputs(Terminals 4,5)
Stability
Voltage Max.95% of Input Voltage
Speed variation less than +/-0.25% at constant load
Current Continuous 7A min.0.5A
Max. 15A 10seconds
Static Power Consumption
MPU Signal(Terminals 10,11)
Less than 1Walt@12 Vdc
Frenquency 10-10,000Hz
Less than 2 Walt@24 Vdc
Voltage 1-120Vac(RMS)
Frenquency Adjustment
Speed Temperature Shift
Speed Adjustment pot (25 tum)
Less than 3% at temperature range -40 to +80
Setting range 600-9,500Hz (With DIP Switch)
Remote Speed Potentiometer(Terminals 6,7,9)
Environment
Max. +/-7% at 5000omega1 walt potentiometer
Operating Temperature -40 to +80
Storage Temperature -40 to +85
Isochronous Load Sharing (ILS) (Terminals 6,8)
Relative Humidity Max.95%
Input Resistance greater than 2000 omega
Vibration 5.5Gs@60Hz
Input Ranges -5 Vdc to +5 Vdc/0 to 10 Vdc
Sensitivity 15%at 10 Vdc
Dimensions
IDLE Control (Terminals 2,3)
147.0(L) x 114.0(W) x 50.0(H) mm
Adjustment range 30-90% of Normal Speed
5.79(L) x4.49(W) x 1.97(H) inch
Ramp Time
Weight
3-20 seconds(adjustable)
690g +/- 2%
1.52lb +/-2%