Electronic Engine Control
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting.
4.3inch colorful screen display with UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, screen can display various faults in the same time that the genset will be stopped once it can't work smoothly.
There are Simplified Chinese, Traditional Chinese, English, Spanish, Russian interface options, more language can be set according to user's request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
Main Features
There are four Models under DC8xD MK3 series.
DC80D MK3: used for single machine automation. Start/Stop through remote start signal.
DC82D MK3: Based on DC80D MK3, it adds Mains monitoring and AMF (Mains/Generator automatic switching control), especially suitable for the automation system composed by mains and genset.
DC80DR MK3: Based on DC80D MK3, it adds RS485 port.
DC82DR MK3: Based on DC82D MK3, it adds RS485 port.
32bit high performance single chip microcomputer.
4.3inch TFT colorful big screen , Available in 5 languages, user's language set if necessary.
Indicator and number display through UI surface.
Acrylic material is adapted to protect the screen.
Silicone panels;
USB Port: parameters can be set even without power through USB port to monitor in real time.
With RS485 communication port, can achieve "Three Remote" functions via MODBUS protocol.
Various kinds of parameters display.
Input/output function, status can be shown directly.
More categories of surface setting.
Real time clock inside.
Maintenance countdown function, can set maintenance or date.
The black box function can save the relevant parameters of the unit when the fault alarm occurs in real time, and it is convenient to find the cause of the fault.
Totally 7 relay's output, among which 5 relay output can be self-configurable, each relay can be set as max 50 functions, besides, there are 2 groups as non-contact terminals.
5 relays can be set as switch value input, and function configurable.
3 sensor simulation input connectors, various kinds of units can be set.
Sensor can be self-defined by front face button or PC software.
Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)
Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen.
Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and perfect failure display and protection.
Standard water-proof rubber gasket. The waterproof can IP65.
Module design: All the connections are adapted with European connectors so that installation, connection, repair and replacement can be more easily.
Parameters Display
Engine RPM
Engine oil pressure
Engine temperature
Engine fuel level
Engine battery voltage
Charging voltage
Mains Frequency (only for DC82D MK3)
Mains phase voltage L-N (only for DC82D MK3)
Mains phase voltage L-L (only for DC82D MK3)
Generator 3 Phase voltage L-N
Generator 3 Phase voltage L-L
Generator phase
Generator 3 phase current A
Generator Frequency Hz
Generator Power Factor COS
Generator active power KW
Generator apparent power KVA
Generator reactive power K Var
Real-time load rate %
Current load rate%
Average loading rate %
Current consumption KWH
Total consumption KWH
Total Crank times
Current running time
Total running time
Maintenance notice
5 switches input status display
Output status display of 7 relays
Protection
Over speed
Under speed
Low oil pressure
High temperature
Low fuel level
Low oil level
External emergency alarm
RPM Lost
Sensor Open
Over Frequency
Under Frequency
Over voltage
Under voltage
Over current
Over power
Maintenance expire
Low water level alarm
Emergency Stop
Crank failure
Stop Failure
Parameters
Options
Parameters
Working voltage
DC8V----36V Continuous
Power consumption
Standby:24V:MAX 1W
Working:24V:MAX 7W
AC Voltage Input
1P2W 30VAC-276VAC (ph-N)
2P3W 30VAC-276VAC (ph-N)
3P4W 30VAC-276VAC (ph-N)
Rotate speed sensor Frequency
200-10000Hz
MAX Accumulating Time
99999.9Hours(Min Store time:6min)
Fuel Relay Output
Max 16Amp +VE Supply voltage
Start Relay Output
Max 16Amp +VE Supply voltage
AUX. output 1
Max 5Amp +VE Supply voltage
AUX. output 2
Max 5Amp +VE Supply voltage
AUX. output 3
Max 5Amp +VE Supply voltage
AUX. output 4
5AMP Non-contact normal close output
AUX. output 5
5AMP Non-contact normal open output
Excitation output
Max 0.9AMP +VE supply voltage
Switch value input
Available if connecting with Battery -
Working condition
-25-65
Storage condition
-40-85
Protection Level
IP65:when waterproof rubber gasket is added between controller and its panel
Insulation strength
Apply AC1.5kV voltage between high voltage terminal and low voltage terminal; The leakage current is not more than 3mA within 1min.
Overall dimension
241mm*177mm*45mm
Panel cutout
220mm*160mm
Weight
0.9Kg