Electronic Engine Control
Summary
This controller is used for fire pump units driven by diesel engines, which has
the functions of parameter setting, start, stop, parameter monitoring, fault monitoringand protection.
4.3 inch screen display with Ul design is adapted in this
controller can display related parameters directly.The screen can display
various faults at the same time.Once the unit does not run normally, it can effectivelyachieve protection.
There are Chinese/English interface options, more language can be set
according to user's request.All the parameters can be configured through the frontface buttons or use programmable interface by RS485 or USB to adjust via PC.Main Features
32bit high performance single chip microcomputer.
4.3 inch screen,Available in Chinese/English languages, user's language setif necessary.
Indicator and number display through Ulsurface.Acrylic material is adapted to protect the screen.
Silicone panels, waterproof, oil-proof, UV-resistant, good operation feel and longservice life.
USB Port: parameters can be set even without power through USB port to monitorin real time.
With RS485 communication port, can achieve "Three Remote" functions viaMODBUS protocol.
Standard CAN communication port, built-in J1939 protocol.Various kinds of parameters display.
lInput/output function, status can be shown directly.More categories of surface setting.
Real time clock inside: preset time operate and auto maintenance is available.Genset working plan can be set as per week or month.
Three class protection countdown function, which can set the maintenance time ordate.
The black box function can save the relevant parameters of the unit when the faultalarm occurs in real time, and it is convenient to find the cause of the fault.
Totally 11 relay's output, among which 7 relay output can be self-configurable,each relay can be set as max 50 functions.
With 6 switches input, up to 40 functions optional.
4 sensor simulation input connectors,4 input types is configurable and variouskinds of units can be set.
2 voltage sampling points of battery packs and 1 voltage sampling points of batterycharger.
2 battery packs can be switched to start the unit.
Battery charging control function, which can protect the battery according to batteryvoltage status.
Sensor can be self-defined by front face button or PC software.
Various of crank conditions (RPM, External input , Oil Pressure,) can be chosen.Control Protection:Auto StartStop of unit, perfect failure display and protection.Standard water-proof rubber gasket.The waterproof can lP65.
Module design: All the connections are adapted with European connectors so thatinstallation, connection, repair and replacement can be more easily.