Speed Controller
General 5 kw welding generator Automatic Voltage Regulator welding stabilizer voltage regulator voltage regulator single phase
Product Name : 5KW Welding Generation Regulator
Model : HJ-5K25DH-1
Output Voltage : AC230V(Adjust)
Voltage Adjustment Rate : 5%
Voltage Steady Range : 1V
Operating Temperature Range : -30°c ~ 85°c
Installation Center Distance : 128mm±1mm/6.5mm
Fit For To Genset : 5KW
gasoline generator Automatic Voltage Regulator (1)gasoline generator Automatic Voltage Regulator (2)gasoline generator Automatic Voltage Regulator (3)gasoline generator Automatic Voltage Regulator (4)gasoline generator Automatic Voltage Regulator (5)gasoline generator Automatic Voltage Regulator (6)
A_01 A_02 A_03 A_04 A_05 A_06 A_07 A_08 A_09 A_10 A_11 A_12 A_13 A_14 A_
replace DSE6120 MKII diesel Generator controller module
Description
The DSE6110 is an Auto Start Control Module suitable for a wide variety of single gen-set applications.
Monitoring speed, frequency, voltage, current, oil pressure, coolant temperature and fuel level, the modules will display warnings, shutdown and engine status information on the back-lit screen and illuminated LED.
Specification
Operating Voltage DC8.0V to DC35.0V,Continuous Power Supply.
Alternator Input Range 15V - 360 V AC (ph-N)
3-Phase4-Wire 26V - 620 V AC (ph-ph)
3-Phase3-Wire 15V - 360 V AC (ph-N)
Single-phase2-wire 15V - 360 V AC (ph-N)
2-Phase3-Wire:
Alternator Frequency 50/60Hz
Speed Sensor voltage VPP 2.2 - 100Vpp (Peak to peak)
Speed Sensor Frequency 10000Hz (max)
Start Relay Output 16Amp Controller Power Voltage Output
Fuel Relay Output 16Amp Controller Power Voltage Output
Programmable Relay Output 1 7Amp 250VAC Voltage Free Output
Programmable Relay Output 2 7Amp 250VAC Voltage Free Output
Programmable Relay Output 3 16Amp 250VAC Voltage Free Output
Programmable Relay Output 4 16Amp 250VAC Voltage Free Output
Case Dimension 210mm x 152 mm x 48 mm
Panel Cutout 186mm x 141mm
C.T. Secondary 5A Rated
Working Conditions Temperature: (-25~+70)°C Humidity:(20~90)%
Storage Condition Temperature::(-40~+85)°C
Protection Level IP55:When waterproof rubber seal installed between the controller and panel fascia.
IP42:When waterproof rubber seal is not installed between the controller and panel fascia.
Insulating Intensity Object: input/output/power
Quote standard: IEC688-1992
Test way: AC1.5kV/1min leakage current:3mA
==========
keywords : control module
function : AMF auto start control module
feature : Compatible DSE6120 MKII