Fuel Line: - Material: synthetic rubber tube - Inner diameter: 6mm - Outer diameter: 12mm - Adapt to temperature: -30 ° C -120 ° C - Hose density: 1.35g/cm³ - Working pressure: 2MPa/300Psi - Burst pressure: 8MPa/1200Psi Tubing filter - Length: 103.6mm - Inner diameter of the tail: 3.94mm - Suitable for: 1/4" or 5/16" Tubing Hose Clamps - Material: 65Mn Steel - Size: 11mm ( 0.45 inch ) Package included: - 1 x 1/4 Inch 6 Foot Fuel Line - 2 x Tubing filter - 10 x Hose Clamps 5/16 Inch Fuel Filters + 10 Pcs 2/5" ID Hose Clamps for K-awasaki K-ohler B&S S mall Engines. Package includes 6 Feet 1/4" ID Fuel Line; 2 x 1/4" In-Line Fuel Filters; 10 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required to use the fuel line. You do not need to purchase those parts extra. The dimensions of the various components within the kit are 100% compatible. The fuel line is divided into 3-layers: inner pipe, outer pipe, and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. The wall thickness is 2.94mm. Oil-resistant, cold-resistant, and ethanol tolerant. A 6-foot / 2 m hose can be cut to size for all your applications. Filter the impurities, dirt, and particles in fuel, prevent blockage of a carburetor, only allow clean fuel flow in, and keep engines at full power. Hose Clamps are made of 65Mn Spring Steel, durable, and can be reused. Tight clamping force prevents liquid leakage.