AUTOMOBILE CV AXLE BOOT KIT—PROTECTING TRANSMISSION JOINTS FOR SMOOTHER AND SAFER DRIVING
Product Attributes
Colors: Black
Sizes: 4.72×3.54×3.54 inch
Applicable Caliber: 2.55 inch/65 mm, 3.14 inch/80 mm, and 3.54 inch/90 mm
Weight: 8.3 oz
Material: Silicone
Packaging: 2 x CV Boots + 2 x Large Clamp + 2 x Small Clamp +6 x Nylon Cable Ties
Strongly Recommended: Before placing an order, please be sure to measure and check the size and caliber data of the product you need, to avoid mismatch after purchase (please allow a slight deviation in manual measurement data)
Installation Steps
Removing the old CV axle boot
1. Remove the clamp: Use pliers or a specialized tool to remove the metal/plastic clamp from the old CV axle boot
2. Remove the CV axle boot: Pull the old boot off the drive shaft and clean off any remaining grease
Installing the new CV axle boot
1. Apply grease: Apply specialized grease evenly inside the universal joint and on the balls
2. Install the new boot: You can use a CV boot expander tool to assist in installing the new CV axle boot. First, insert the smaller end of the new boot onto the driveshaft, keeping the correct orientation (the larger end facing the universal joint)
3. Secure the clamps: Use a specialized clamp tool or pliers to tighten the metal clamps, keeping proper sealing
Product Feature & Functions
1. High-resilience silicone material tightly wraps around the ball joint, effectively blocking out mud, water stains, and road debris, avoiding lubricant leakage, and extending the life of the transmission system
2. Special synthetic silicone formula resists engine oil and high temperatures, remaining flexible and crack-free even during intense driving or long-distance travel