مميزات خاصة

Multiple Caliber: Tie rod end boot can be cut for good fit, containing 0.39", 0.78", 1.1", 1.37", 1.25", 1.49", 1.65", 1.77" several different ID, but it should be noted that please measure the size before use, the length will be shorter accordingly after cutting
Good Protection: Tie rod boots protect your steering system components, made of flexible silicone material, tie rod boots can act as a solid barrier, so that dust/water, etc. can not come into direct contact with the steering components, avoiding wear and tear on the steering components
Size Information: Tie rod boots total size is 8.85*2.42*2.42 inch (total length 8.85 inch), among them, the large port has 1.25 inch ID, 1.34 inch OD, the small port has 0.39 inch ID, 0.42 inch OD, the total length of the cable tie is 7.8 inch. Please be aware of the above dimensions before buying
Abundant Kit: In the tie rod boot kit for you to prepare the steering rack boot*2, clamp*4 (large*2, small*2), tie*6, you can install and replace the work after receiving, the attached clamp and tie can help you fix the steering rack boot
Steps to Use: 1. Find the original steering rack boot position, take off the old aging steering rack boot. 2. Clean the surface of the mounting position, slide the new steering rack boot to the original position and adjust the position slightly. 3. Finally, use the clamps or tie wraps to fix it

وصف

NO NEED TO WORRY ABOUT STEERING COMPONENTS WEARING OUT WITH OUR STEERING RACK BOOT

Product Attributes
Colors: Black
Sizes:
Steering Rack Boot:
Overall Size: 8.85*2.42*2.42 inch
Small Opening: OD: 0.42 inch / ID: 0.39 inch
Large Opening: OD: 1.34 inch / ID: 1.25 inch
ID (Actual Range): 0.39", 0.78", 1.1", 1.37", 1.25", 1.49", 1.65", 1.77"
Different OD: 0.42", 1", 1.3", 1.7", 1.34", 1.5", 1.6", 1.8", 2"
Tie Length: 7.8 inch
Weight: 7.57 oz
Material: Silicone
Packaging: Steering Rack Boot*2, Clamp*4 (Large*2, Small*2), Tie*6

Product Functions & Features
1. Warm Tip: Our steering rack boot allows you to cut and use, please check the caliber information before purchase
2. Soft Silicone: Adopting soft silicone as the main material of steering rack boot, it won't be deformed due to long-term stress, so it can play the role of protection continuously and stably
3. Ties & Clamps: The kit has prepared the accessories for you to fix the steering rack boot, so that you can install it after receiving it, no need to buy extra

Product Installation
1. Find the original steering rack boot position, take off the old aging steering rack boot
2. Clean the surface of the mounting position, slide the new steering rack boot to the original position and adjust the position slightly
3. Finally, use the clamps or ties to fix it

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه