Features the advanced STM32F722 microcontroller combined with the latest 42688-P Gyro for precise sensor data, giving responsive and accurate flight control.
Designed for direct plug-and-play compatibility with the Air Unit, ensuring a clean and streamlined setup.
Integrates the GEP-BL32 50A 32Bit ESC for robust motor control and includes dual independent BEC providing ample, clean power for all onboard components.
Features simple shock-absorbing mounts and an integrated LC filter, working together to minimize vibrations and electrical noise for consistent gyro and barometer performance.
Includes substantial onboard logging memory for flight data, supports Bluetooth-based parameter tuning via app, and uses a modern USB-C interface for easy firmware updates and configuration.
وصف
SpecificationsGEP-F722-BT-HD V3 Flight Controller
MCU: STM32F722
IMU：ICM42688-P(SPI)
Air Unit Connection: Directly plugs into the Air Unit
Black Box: 512M onboard
Bluetooth: Supported
Barometer: Supported
USB Interface: Type-C
OSD: BetaFlight OSD w/ AT7456E chip
BEC: 5V@3A, 9V@2.5A dual BEC
Firmware Target: GEPRCF722_BT_HD_V3
Size: 36.9×36.9mm, hole: 30.5×30.5mm, φ4mm hole becomes φ3mm after using a silicone shock-absorbing ring
Input Voltage: 3-6S LiPo
UART: 5 groups (UART4 fixed for Bluetooth)
Power Filter: Integrated LC filter
Weight: 8.2g
GEP-BL32 50A 96K 4IN1 ESC
Model: GEP-BL32 50A 96K 4IN1 ESC
Input Voltage: 3-6S Lipo
Continue Current：50A
Burst Current: 55A (5 second)
Galvanometer：Support
Telemetry: Support
Support Protocol: Dshot 150/300/600
Size：42.5×42.1mm，hole30.5×30.5mm
Weight：14g
Target: ST_G0_05 – 31.92
Note: Pre-installed with BL32 test firmware, extensively tested for safety and reliability
(AM32 also supported; customer flashing required.)
Includes1 x FC board
1 x ESC board
1 x Capacitor
1 x O3 3-in-1 connection cable
1 x FC adapter cable
1 x sh1.0 4pin silicone cable
1 x Camera connection cable
1 x VTX connection cable
1 x XT60 power cable
4 x M3*30 screws
4 x M3*25 screws
8 x Nylon nuts
12 x Silicone anti-shake pads
