Our PVC Panel Reptile Enclosure is perfect for many reptiles including bearded dragons, small monitor lizards, ball pythons, leopard geckos, and more. This enclosure is made with an aluminum frame and PVC panels for the bottom, back, and sides that slide into the frame. The top is a heavy-duty screen, the front viewing panel is acrylic, and doors are glass. IMPORTANT NOTES: If you add a lot of weight to the enclosure, make sure you support the bottom when moving it. When assembling, be sure to put the acrylic substrate panel in before using the mallet to put the front together. When assembling, be sure to put the top on the correct way with the double track in the front. To increase humidity in the enclosure, you can purchase a 1/8” or 3/16” sheet of acrylic or PVC from your local hardware store to set on top of the screen. This enclosure is not waterproof. You will need to use silicone to seal the bottom. You can spray the substrate but do not dump water directly into it. They MUST be assembled on a hard surface. Carpet will not work. Parts of the enclosures are intentionally designed with a bit of tolerance to allow for easier assembly and disassembly, should you need to take the enclosure apart in the future. This design choice ensures that the enclosure remains functional and easy to manage over time. It is important to note that the enclosure should not be lifted from the top, as this could affect its stability. However, when used as intended, the design should not impact its overall functionality.