STANDARD VERSION - This version is great if you just want to protect your equipment from dust and dirt. It consists of an outside fabric layer of protection on the front, sides, and top, with an inner layer of flannel behind the front panel for softness against the screen. The underneath bottom side of the cover is open but has a strip of elastic across the bottom so it keeps the bottom and side panels snug to the equipment. Pre-Quilted Fabric: This fabric is a thicker material but it is pre-quilted and it is washable (machine wash cold gentle cycle, tumble dry low). This is ideal for an indoor cover or even in the garage if you are not concerned about water being splattered on your gym system. This fabric can have cording added to it to frame out the front panel. The innermost layer for the front screen will be made from a coordinating color of flannel. This cover was custom designed to fit a Tonal Home Gym System. Covers for other gym systems are also available - contact me with the dimensions you need and we can work up a quote. This cover was made to the following size dimensions: (NOTE: Be sure to actually measure your Tonal to check the measurements - Websites are often wrong and cannot be relied on) 21.25" wide x 51" high x 5" deep - with the back lip to be 5.5" long on the back side. The cover has an open back with the exception of the back lip at the top (5.5 inches) which will be slipped down behind the upper part of the system. The thickness of the back lip will be like that of a towel, and it will hold the cover on the unit. The bottom edge of the cover is open but it has a 1" strip of elastic across the bottom (centered).