What's in the package?
1x glass etch paste (300g), 1 x stirring stick, 2 x application brushes, 2 x gloves, 1 x sticker, 1 x instruction, Complete supporting facilities, easy to use.

How to use glass etch cream?
1. Use alcohol or glass cleaner to clean the glass surface.
2. Stick the glass etch stencils on the glass surface, and use tape to seal all the surfaces that do not need glass etch.
3. Use a special application tool to evenly apply the etch cream for glass on the glass surface.
4. Let the glass etch paste applied to the surface of the screen printing template act naturally for 3-5 minutes
5. Rinse the glass surface thoroughly with clean water to remove all residues.

Note:
1. Stir the etch cream evenly before using it.
2. The glass etch paste cannot come into direct contact with the skin, and acid-proof gloves need to be worn when using it.
3. It cannot be re-etched a second time.
4. The etch cream for glass should be sealed when not in use.
5. High-boron and high-silicon glass takes longer to etch.
6. The bottle of glass etch paste is not full, but the net content of the product is sufficient. This is to prevent the air pressure problem from causing liquid leakage.
7. Due to air pressure and temperature problems, small crystals may appear. At this time, the whole jar can be soaked in hot water (note that it is not hot water) for proper heating. Stir continuously during the heating process, and the crystals can be dissolved. After thawing, it will not affect the normal use of the product.