PH3 Desktop Rear 4-way Hard Disk Control Board Optical Drive Power Control Switch SATA Power Expansion Card

Model No.: PH3
Name: Hard Control 3
Usage: For multi-hard disk control, multi-system switching, optical drives, fans, RGB lighting effects, etc., the host within the power equipment control and management.
Features: chassis rear, hidden and safe, convenient and beautiful

Input to the host computer power supply interface
using standard SATA power supply interface
2 inputs to ensure sufficient power
Description: connect one input can be used, when the user's equipment consumes a lot of power can be connected to both inputs at the same time in order to increase power

4-position independent switch
adopts dual-channel self-locking mechanical switch
Each switch controls one output independently.

Output interface adopts square 4P socket with snap-in
snap-in interface is firm and reliable
square 4P to prevent insertion in the opposite direction, the pin is rugged and conductive strong
each one way output with 2, high-capacity filter capacitors to ensure power output stability

Backlit digital number LED design
When the switch is pressed on, the corresponding LED illuminates the number
The status can be observed from the side.

Convex edge mounting design to increase stability
Can be installed in the position of PCI or PCI-E slot, play a role in positioning
Refuse to rock!

Complete accessories, ready to use
4 square 4P to SATA output cables
4 cable strip

18AWG thicker core
Special parallel cable, cable length 60cm

Standard host power cable color
1 yellow = 12V
1 red = 5V
2 black = ground

Output connector definition.
1. Upper left corner, connected to 12V
2. Upper right corner, connected to 5V
3. Lower left corner, connect to GND ground
4.Lower right corner, connect to GND ground