The projector provides two different remote control codes: the factory-set initial code (Code 1) and the secondary code (Code 2). When operating the projector in Code 2, both the projector and the remote control must be switched to Code 2.

To change the code for the projector:
Select either Code 1 or Code 2 in the Setting Menu.

To change the code for the remote control:
Press and hold both the MENU and IMAGE buttons together for 5 seconds or more. After changing the code, make sure the remote control operates properly.

Note:
When different codes are set on the projector and on the remote control, any operation cannot be made. In that case, switch the code on the remote control to fit the code on the projector.

If the batteries are removed from the remote control for a long period of time, the remote control code will be reset.

Compatible projector models:

Sanyo PLC-WK2500
Sanyo PLC-XC56
Sanyo PLC-XD2200
Sanyo PLC-XD2600
Sanyo PLC-XK2200
Sanyo PLC-XK2600
Sanyo PLC-XK3010
Sanyo PLC-XR201
Sanyo PLC-XR251
Sanyo PLC-XR301
Sanyo PLC-XU106
Sanyo PLC-XU106K
Sanyo PLC-XU300
Sanyo PLC-XU300A
Sanyo PLC-XU300K
Sanyo PLC-XU301
Sanyo PLC-XU301A
Sanyo PLC-XU301K
Sanyo PLC-XU350
Sanyo PLC-XU350A
Sanyo PLC-XU350K
Sanyo PLC-XU4000
Sanyo PLC-XW200
Sanyo PLC-XW200K
Sanyo PLC-XW250
Sanyo PLC-XW250K
Sanyo PLC-XW300

Notice: Make sure there's no obstacle between the remote control and projector when operating the device.

Warranty: Refund available within 30 days, replacement available within 12 months from order date.