Sealed Bus Bar with integrated 12 pin connector to 5/16″ stud. Quicker installation with plug and play connections. Compact and maintenance free design. Suitable for Marine, Off-Road, Specialty Vehicles, and more. Rated for up to 150A @ 48V DC. IP67 Sealed for maximum protection. Applications for the Sealed Buss Bar: Marine - The bilge environment always has moisture present. Even if it seems dry, there is moisture in the air. Connections to pumps and blowers have been upgraded to sealed connectors but why leave the exposed connections for the bus bar, when a Sealed Buss Bar would be much more reliable. Off-Road Equipment - Equipment such as front end loaders, skid steers and tractors typically run in muddy conditions. While chassis grounding is popular, the connections to the chassis are the same as the bus bar and will be susceptible to corrosion. Changing to a sealed bus system will provide the next level of protection for longer life with less down time. Specialty Vehicles - You may never know where your customer is going to take their vehicle, but you can be assured that rain, mud, salt, and snow will be a likely scenario. Provide them with the highest level of protection for their valuable investment. Sealed Bus Bar's system will take the uncertainty out of the last part of the electrical system. Off-Road Vehicles - Do you have a golf cart, ATV, side by side? One of the biggest failure points is electrically related. Eliminate the need to clean and tighten connections that can get packed with mud or snow with a Sealed Buss Bar.