مميزات خاصة

𝑩𝒖𝒊𝒍𝒅 𝒕𝒐 𝑳𝒂𝒔𝒕: It is made of high-quality cast iron, copper, aluminum, and plastic, and adopts a painting process, making it solid, and not prone to rust and corrosion, so it can remain beautiful and practical for a long time
𝑷𝒐𝒘𝒆𝒓𝒇𝒖𝒍 𝒂𝒏𝒅 𝑬𝒇𝒇𝒊𝒄𝒊𝒆𝒏𝒕: The 3420rpm and 1.6hp powerful copper motor delivers the product excellent performance, allowing it to reach a maximum flow rate of 1056.68GPH and a maximum head of 183.73ft. It is ideal for irrigation, pumping, and watering while saving the time and cost of manual transportation
𝑺𝒂𝒇𝒆𝒕𝒚 𝑮𝒖𝒂𝒓𝒅: It has built-in overheat protection, IP44 protection level, and uniform heat dissipation holes, which can timely reduce the temperature during operation, extend the service life of the product, and improve the safety of use
𝑳𝒐𝒘 𝑵𝒐𝒊𝒔𝒆: The product adopts a pure copper motor that allows it to run with low noise(0-30dB), which will not disturb you and your neighbors when using it
𝑾𝒊𝒅𝒆 𝑨𝒑𝒑𝒍𝒊𝒄𝒂𝒕𝒊𝒐𝒏: The product is suitable for irrigation, sprinkling, water delivery, drainage, small underground sprinkler systems, outdoor and other scenarios such as gardens, lawns, farms, rural homes, and wells. It can be used as a booster pump to pressurize your home for solar, washing machine, water heater, tap water, shower, etc.

وصف

Specification
Material: Cast Iron, Copper, Aluminum, Plastic
Process: Spray Painting
Color: Black, Blue
Assembly Required: Yes
Motor Type: Pure Copper Motor
Power Source: Corded Electric
Plug Type: US Standard
Voltage: 110V
Power: 1.2KW/1.6HP
Insulation Grade: B　
Protection Level: IP44
Applicable Temperature: Below 80℃/176℉
Water Inlet Size: 2.54cm/1in
Water Outlet Size: 2.54cm/1in
H MAX: 56m/183.73ft
Speed: 3420rpm
Input: 11.5A, 60Hz
Max. Flow Rate: 4m³/h/1056.68GPH
Operation Noise: 0-30dB
Power Cord Length: 2m/6.56ft
Product Size: 42*18*22cm/16.54*7.09*8.66in
Package Size: 48*30*20cm/18.9*11.81*7.87in
Gross Weight: 15kg/33.07lbs
Net Weight: 13.5kg/29.76lbs

Package Included
1* Water Pump
1* Mechanical Switch
All Accessories for Installation

Notes
1.Please read the labels on the product before use.
2.Please fill the pump with water before it starts working and do not run the pump without water.
3.The pump should be installed in a dean, dry, and ventilated location which provides adequate room for servicing and protection from freezing temperatures. It should be bolted to a good foundation, preferably concrete, and provided adequate drainage.
4.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

مرحبًا،

بحث

1.6hp ضحلة بئر المضخة النفاثة مضخة البئر مضخة مياه الريف المضخة الطائرات الطائرات الطائر

مميزات خاصة

وصف

منتجات شبيهه