EcoGrip Cold Build Plate for Bambu Lab X1/P1/A1 Series – Low‑Temperature 3D Printer Bed for PLA & PETG Upgrade your Bambu Lab 3D printer with a purpose‑built cold plate designed for energy‑efficient printing. The EcoGrip Cold Build Plate by 3DHUB combines a textured resin coating with a flexible spring‑steel core, delivering strong adhesion for PLA and PETG at low bed temperatures. Running your heatbed at only 30–45 °C for PLA or 50–60 °C for PETG reduces power consumption and minimizes warping on large prints. The finely matte surface ensures a smooth, professional‑quality bottom finish, while the spring steel allows the sheet to flex so models pop off cleanly once cooled. To avoid parts bonding too tightly, break in the surface by printing a full‑bed sheet or applying a thin layer of glue or glass cleaner before your first few prints. For best results, use lower nozzle temperatures (around 190–205 °C for PLA and 220–240 °C for PETG) and avoid silk PLA or high‑temperature filaments like TPU and ABS. Let the plate cool fully before removal, use a plastic scraper, and clean with warm water and mild detergent. Properly maintained, the EcoGrip plate will deliver consistent adhesion over hundreds of print cycles.