3 Flute Carbide Milling Cutter Tungsten End Mill CNC Tool 1 to 20mm HRC55 for CNC Tools Solid Carbide,Aluminum Composite Panels
Product Information:
Name: End Mill / End Milling Cutter
Material: Carbide / Tungsten Steel
Diameter: d0.5-d20
Flutes: 3F
Cutting Hardness: HRC45°/HRC55°
Coating Type: Uncoated
Application: Widely used for processing high viscosity metal materials such as copper, aluminum, and aluminum alloys, etc.
Application Device: Precision CNC equipment such as CNC machining centers, CNC lathes, engraving machines, bench drills, etc.
Product advantages:
1. The overall material is made of tungsten steel, which hasseismic resistance and wear resistance.
2. Equipped with a large capacity spiral chip removal groove, the integrated spiral groove ensures smoother chip removal.
3. Adopting a sharp blade design process, it can quickly cut and drill holes, effectively reducing the number of tool changes.
4. The standard round and straight shank design has strong compatibility, tight bite, high bearing capacity, and is not easy to break.
Precautions:
1. Tungsten steel tools havehardness, but their relative toughness will decrease. It is not recommended to use them on devices with poor stability, such as handheld devices.
2. The higher the HRC value, the higher the hardness and wear resistance of the metal material that can be processed; If you want to process materials such as aluminum and copper that are prone to knife sticking, it is recommended to use an uncoated 3F end mill; If you need to process metal materials such as steel and stainless steel, please choose coated end mills
General Safety Note:
For all cutting/turning tools:-Cutting tools have sharp cutting edges as its characteristic. Please wear protective gloves to avoid the possible injuries caused by direct hand touching of cutting edges.
-Please read the operation manual book and the product catalogue before the operation. Please use the recommended operation methods and technical parameters as reference. Also, please do use the safety face cover or goggles for protection to avoid the broken pieces might cause by improper operation methods or working conditions.
-Please do use the safety face cover or goggles for protection to avoid the scattered broken pieces might cause by overloaded impact of force and excessive abrasion to the cutting tool. Please replace the cutting tools promptly to enable further operation running normally.
-Please do use the safety face cover or goggles for protection to avoid injury or burns caused by the split of high-temperature chips. When removing chips, please make sure the machine is not running and workers are wearing protective gloves while cleaning chips.
-Tools and materials reach high temperatures during cutting operation. Please do use protection gloves to avoid burns caused by direct touch to the tools and materials after cutting shortly.
-During the process of cutting, sparks will be generated. Sparks and high-temperature chips may cause fire. Please do not operate around hazardous zone where has the possibility of fire or explosion caused by sparks and overheated chips. In the case of using oil cutting fluid in CNC lathe machine, please make sure there is sufficient fire-protection equipment surround the operation area.
-With the high speed operation condition, dynamic disequilibrium or vibration of the chuck within the CNC lathe machine will cause damage to cutting tools. Please do use the safety face cover or goggles for protection to avoid injuries. Please do carry out trials to confirm that whether there is vibration or unusual sound and movement within trials.
-Please do not touch the finished workpieces with hands directly to avoid the injuries caused by burs on workpieces' surface.
Milling cutters:-Milling cutters have sharp cutting edges as its characteristic. Please wear protective gloves to avoid the possible injuries caused by direct hand touch of cutting edges.
-Eccentrically rotation or poor dynamic equilibrium within the CNC lathe machine can cause vibration of milling cutters and result in damage of milling cutters. Please do use the safety face cover or goggles for protection to avoid injuries caused by scattered broken pieces of milling tools. Please use the recommended rotation speed for operation. And please do have regular check and adjustment of the precisions and balance of the rotating parts to prevent eccentrically rotation or vibration caused by bearing abrasion.
Drilling:-When using drilling to drill a hole on spinning workpiece, residual chips might fly out with a high speed and high temperature. Please do use the safety face cover or goggles for protection to avoid injuries might cause by scattered chips. Please install protective covers around the chuck.
-The drilling with small diameter has very sharp edge and tip. Directing contact it with bare hands may result in harmful injuries such as Stabbed, or even broken drill point in the finger that cannot be removed. Please do use the safety face cover or goggles for protection to avoid injuries might cause by scattered chips. Please do have gloves as protection when install drillings at the CNC lathe machine.
Type : End Mill
Material : Carbide