Description:
Charging voltage:12.6v ~ 13v
Over Charge voltage:4.25 ~ 4.35v ± 0.05V
Over Discharge voltage: 2.3 ~ 3.0v ± 0.05V
Max Working current:6 ~ 8A
Max peak current:10 ~ 13A
Internal resistance: Less than 100mΩ
Quiescent current: Life cycle:more than 30000 hours
Resistance:less than 45 Ω short circuit protection, can protect, delay the recovery.

Application:
1. 10.8V (Rated voltage of polymer battery)
2. 11.1V (18650 or 3.7V lithium battery rated voltage)
3. 12.6V (Lithium battery full charge voltage)

Note:
1. Connect 0V (B-), 3.7V (B1), 7.4V (B2) and 11.1V (B +) , Don't short circuit on purpose!
2. After connecting the cable, it needs to be charged before output.
3. When connecting 3 batteries in series, make sure that the voltage of each battery is the same. If not, please fill each battery separately and use it in series. In the discharge test, the battery with the fastest voltage drop is a bad battery.
4. Do not mix good batteries with bad batteries! The capacity/internal resistance of the 3 batteries should be as close as possible

Package Included:
5 x 3S 10A 11.1V/12V/12.6V 18650 Lithium Battery Protection Board
1 x 39.inch/1m Nickel Strip