Special Features

Matters Need Attention: Before running the procedure, pls install the corresponding computer system driver. Drivers: directly from the chip manufacturer: WCH 340 product home page: http://www.wch.cn/product/CH340.html; http://www.wch.cn/download/CH341SER_LINUX_ZIP.html (linux should operate fine without the driver); http://www.wch.cn/download/CH341SER_MAC_ZIP.html(MAC); https://www.wch.cn/downloads/COMTransmit_ZIP.html(windows)
NOTE: If you want it to work on a Mac, please install the diver from this: https://drive.google.com/drive/folders/1phezjJtQW0vav34RoivsAzjF0ugmqjgn?usp=sharing; If you want it to work under Windows 10, You must turn off automatic updates before you install the driver, please install the diver from this: https://drive.google.com/drive/folders/1tl6sVGVduyH1JHfaYdMqeMGKdo-rg3im?usp=sharing
If you need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html; More details on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html
Small Ar duino UNO Board: It is a smallest, complete and breadboard friendly board. It has everything that Ar duino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper; More Breadboard Space: Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)
Specification: The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. Usage: The Nano is 100% compatible with Ar duino, with the same chips ATmega328P and CH340 with the official version

Description

Nano V3.0 ATmega328P Microcontroller Board w/USB Cable for Arduino

Features:
Fully compatible with Arduino Nano V3.0 ATmega328P-AU
ATmega328 Microcontroller
Bootloader installed, ready to upload sketches from Arduino software
Microcontroller: ATmega328P-AU
Operating Voltage: 5V
Input Voltage (recommended): 7V-12V
Input Voltage (limits): 6V-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 8
DC Current per I/O Pin: 40mA
DC Current for 3.3V Pin: 50mA
Flash Memory: 32 KB (ATmega328) of which 2 KB used by bootloader
SRAM: 2 KB
EEPROM: 1 KB
Clock Speed: 16 MHz
Dimension: Approx. 45x17x19mm
Cable Length: 245mm
Color: Blue(as the picture shows)

How to use:
1.Download IDE of Arduino
Download link: http://arduino.cc/en/Main/Software (Copy to open)

2.Download USB Chip driver
Download link: https://www.wch-ic.com/downloads/category/30.html?page=1

3.Plug NANO development board, the driver will automatically install

4.Choose the NANO board in the die

5.Select the COM port, this can be in My Computer inquiries, just inside your UNO development board port

6.The best choice, Arduino comes with the routine program, burning into it

Youtu be video: https://www.youtube.com/results?search_query=Mini+Nano+V3.0+ATmega328P

Package Content:
1 * Nano V3.0 ATmega328P Arduino Compatible Board
1 * Mini USB Cable

Hello,

Search

MakerFocus Pre-Soldered Nano V3.0 Board ATmega328P Microcontroller CH340 Chip 5V 16M with USB Cable Compatible with Arduino IDE(Mini USB B Port)

Special Features

Description

Related Items