【VATS ANTI-THEFT SYSTEM BYPASS】Designed to bypass the factory GM Vehicle Anti-Theft System (VATS), eliminating the need for a chip key or factory key resistor signal. Helps resolve common no-start conditions caused by worn ignition lock cylinder wires, faulty key resistors, or VATS-related security system issues.
【METHOD OF APPLICATION】 If you know your VATS number: Use included instructions to toggle the correct resistor inside the module; Set the module to match your vehicle's resistance value. If you do not know your VATS number: Toggle one resistor at a time; Turn ignition ON and observe the “SECURITY” light; Wait approximately 5 minutes per attempt; Once the correct value is found, the security light will turn off; Leave that resistor in the ON position.
【PLUG AND PLAY INSTALLATION】Installs directly into the factory VATS connection under the dashboard without cutting, splicing, or modifying vehicle wiring. Designed for quick installation and reliable operation on compatible GM VATS-equipped vehicles. NOTE: Do not pull wires on module if you remove it from your vehicle; The wires are sensitive and may break; Failure to remove carefully and ripping the wires will be subject to no return!
【ATTENTIVE SERVICE】 If you have any questions about the VBM100 VATS Bypass Module before or after purchase, please feel free to contact us. We work hard to manufacture high-quality products and also strive to treat every customer with care. Thank you for your choice.