reflective tape
𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀
Enhanced Visibility and Safety
Convenient Usage
Versatile Application
𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗔𝘁𝘁𝗿𝗶𝗯𝘂𝘁𝗲𝘀
Material: PVC
Quantity: 1 Roll
Color: White/Yellow
Size: 0.4in wide × 26 feet long
𝗡𝗢𝗧𝗘
Clean the surface before application. This reflective tape adheres to any smooth, flat surface but should not be applied to uneven, rough, or highly curved objects, as it may peel off.
Q & A
❓Why can't I see the reflective effect?
Optimal reflective conditions typically require: a distance of over 20 meters, with the light source and line of sight aligned to achieve maximum reflectivity.
At close range, the light source may be obscured, making observation difficult. To check the reflective effect, try these two methods: 1) Shine a bright flashlight at nose level (simulating a driver's perspective); 2) Take a photo with your phone's flash on.
PS: Regarding why a flash photo verifies reflectivity: Using a phone flash works because the light source and camera lens are nearly parallel, capturing the strongest effect. This mirrors how a driver's headlights align with their line of sight inside the vehicle, allowing occupants to observe the peak reflection. The principle is identical.
❓What should be considered when using reflective stickers?
Reflective stickers are made of relatively rigid material, suitable for smooth surfaces like metal, painted surfaces, and tiles. They are not recommended for fabrics, small cylindrical objects, frosted plastic parts (due to some plastics' low adhesion), oily surfaces, or spherical surfaces, as these may cause peeling or detachment.
Before application, clean the surface, determine the placement, apply in one smooth motion, and press firmly for at least 10 seconds. Avoid washing the vehicle or exposing it to water for 24 hours.
Usage Steps
Wipe the vehicle surface clean of dirt and dust, ensuring it is smooth, oil-free, and wax-free.
Gently peel off the backing paper from the reflective sticker.
Apply the adhesive side to the cleaned vehicle surface.
Note: Ensure the surface is dry before application.
❓How to remove unwanted reflective stickers?
Use a heat gun to warm the sticker before peeling it off. This won't damage the paint. Occasional adhesive residue can be removed with volatile liquids such as:
95%+ concentration alcohol (available at pharmacies)
Foam cleaner
❓How should reflective stickers be maintained and cleaned?
Reflective stickers can be cleaned using a neutral detergent and a soft cloth. Wipe from the center outward to avoid damaging the sticker's edges or corners. Never use a high-pressure water jet on the edges. Adjust the spray to a mist setting; otherwise, cracking may occur.