Digital Signal Processors
High Precision DC 0-10V 4-20mA Analog Signal Generator Adjustable Voltage Current
0-5V/3V/1V 0-22mA Debugging Calibrator
Product Feature:
Multiple output ranges can be set ( default 0-10V/0-20mA)
A variety of display methods can be set;
Current output 2, 3, 4-wire system passive and active are fully compatible;
Output with short circuit protection, power supply with reverse polarity protection;
3 power supply modes: external DC15-30V/USB-5V/built-in power management (optional):
Voltage and current adjustment one-key switching, independent wiring, simultaneous output:
Coarse adjustment fine adjustment dual mode, the number of adjustment turns can be set custom quick adjustment mode;
Battery charge and discharge overcurrent protection, automatic charging management, power indication:
4-bit high-brightness digital tube, 0.01 precision adjustment, output calibrateable;
matte anti-slip shell, high-grade aluminum alloy knob, electroplated buttons, comfortable to hold, beautiful and generous
10V can be set to facilitate debugging forward and reverse;
0V output can definitely 0V, the performance far exceeds that of single-power products, the control dimmer can not be lit at all, and the motor speed regulation can be completely stationary;
The software can customize the quick adjustment function, and can be set to output only a few values, which is convenient for rapid commissioning of production
Product Parameters:
three power supply modes ,using the mobile phone charger or external 24V can charge/work:
External wiring terminal power supply DC15-30V 1W(without charging)/4W(charging)
External MicroUSB-5V current 0.2a (no charge)/0.8A(charge);
(Optional) The built-in 3.7V lithium battery(1000mah), the maximum charging current is 0.6A, Generally, it takes more than 4 hours to fully charge. It can be used for 1-5 hours
working environment: 0-40 C,
Size (cm): Shell =100*60*20mm ,The protruding 9cm,The knob protruding 15cm
Product Usage:
Terminal blocks from left to right 1-6
1--Power supply negative (input)
2--Power supply positive (input)
3--Current passive mode 24V+ input
4--Current signal output
5--Voltage signal output
6--Signal ground (connect 1-GND)
Accessories:
Android microUSB charging cable
Crocodile clip
2.5mm slotted screwdriver
Cold pressed terminal connector
==========
Battery Included : Yes
High-concerned chemical : None
DIY Supplies : Electrical

Certification :
Display Size : 2.9 Inches & Under
Type : 0-20mA signal generator
Voltage Range : 0~10V(default)
Current : 0-20mA(default)
Short Circuit Protection : YES
Reverse Protection : YES
Charging Protection : YES
Display : 4 Digit Digital Tube
Battery Capacity : 1000mA