Digital Signal Processors
Description:
JDS6600-60M Dual-channel Function Signal generator combines multiple functions in one, such as Function Signal Generator, Arbitrary Waveform Generator, Pulse Generator, Sweep, Counter and Frequency Meter, etc.
The instrument adopts the Direct Digital Synthesizer(DDS) technology and provides stable, precise, pure and low distortion signals. It's a great testing or measuring instrument for electronics engineers, electronic laboratory, teaching and researching.
Feature:
1. 320*240 2.4" TFT color display, simultaneously display parameters of CH1 and CH2.
2. Use soft silicone keys instead of traditional patch keys, high sensitivity and convenient for operation.
3.JDS6600-60M, the maximum sine wave frequency is 60MHz, and the maximum square wave is 25MHz, 266MSa/s sampling rate and 14bits vertical resolution.
4. 60 groups of arbitrary wave storage function, memory depth of each group is2048*14bits, can re-call and check custom waveforms, draw arbitrary waveforms.
5. Completely independent dual channels output, synchronizing operation and adjustable phase difference.
6. Duty-cycle of each channel can be adjusted independently, the adjusting resolution is 0.1%.
7. High frequency accuracy and resolution: frequency accuracy up to 10^(-6) magnitude, total range frequency resolution is 0.01uHz.
8. High amplitude resolution: the minimum amplitude resolution can 1mV, amplitude range is 2mVpp~20Vpp.
9. Sweep function: linear sweep and logarithmic sweep functions; 0.1s-999.9s sweep time; forward, backward and roundtrip sweep directions.
10. Pulse trains burst output function: allow the unit output 1~1048575 arbitrary pulse trains.
11. Measurement functions: can measure signal frequency, cycle, positive/negative pulse width and duty cycle; 1Hz~100MHz frequency range.
12. -9.99V~9.99V DC offset range, offset resolution: 0.01V.
13. With digital signal output function, CMOS output range 0~10V.
14. Storage feature: can store 100 groups of parameters set by the user and extract at any time.
15. Counter function: with DC and AC coupling modes.
16. Arbitrary wave editing function: user can edit arbitrary wave on PC and then download to output from the instrument.
17. Communication function: the PC can be used to control the instrument.
18. output short-circuit protection: all signal output can work 60s under load short-circuit condition.
Teachnical Parameters:
Sine frequency range: 0~60MHz
Square frequency range: 0~25 MHz
Triangle frequency range: 0~25 MHz
Pulse frequency range: 0~6 MHz
TTL digital frequency range: 0~6 MHz
Arbitrary wave frequency range: 0~6 MHz
Square rise time: 10nS
Pulse width adjustment range: 25nS - 4000S
Frequency accuracy: ±20 ppm
Frequency stability: ±1 ppm/3h
Frequency characteristics
Model
JDS6600-15M
JDS6600-30M
JDS6600-40M
JDS6600-50M
JDS6600-60M
Sine frequency range
0~15MHz
0~30MHz
0~40MHz
0~50MHz
0~60MHz
Square frequency range
0~15MHz
0~25MHz
0~25MHz
0~25MHz
0~25MHz
Triangle frequency range
0~15MHz
0~25MHz
0~25MHz
0~25MHz
0~25MHz
Pulse frequency range
0~6MHz
0~6MHz
0~6MHz
0~6MHz
0~6MHz
TTL digital frequency range
0~6MHz
0~6MHz
0~6MHz
0~6MHz
0~6MHz
Arbitrary wave frequency range
0~6MHz
0~6MHz
0~6MHz
0~6MHz
0~6MHz
Pulse width adjustment range
100nS - 4000S
50nS - 4000S
40nS - 4000S
30nS - 4000S
25nS - 4000S
Square wave rise time
25nS
15nS
10nS
10nS
10nS
Minimum frequency resolution
0.01uHz(0.00000001Hz)
Frequency accuracy
±20 ppm
Frequency stability
±1 ppm/3h
Waveform specifications
Waveformtypes
Sine, square, triangle, pulse (duty-cycle correction, pulse width and cycle time adjustable), arbitrary wave, CMOS, DC level, half-wave, full-wave, pos-ladder, neg-Ladder, noise, exponential rise, exponential fall, tone, cink pulse, lorentz pulse, and 60 kinds user-defined waveforms.
Waveform length
2048 points
Waveform sampling rate
266 MSa/s
Waveform vertical resolution
14 bits
Sinewave
Harmonic
suppression
Total harmonic
distortion
Square and Pulse wave
Overshoot
(Square)
5%
Pulseand Partial sine wave
Duty-cycle
adjustment
range
0.1 - 99.9%
Sawtooth wave
Linearity
98%(0.01 Hz~10 kHz)
Output specifications
Sine wave amplitude range
Frequency10MHz
10MHz Frequency30MHz
30MHz Frequency
2mVpp~20Vpp
2mVpp~10Vpp
2mVpp~5Vpp
Square wave,Triangle wave
amplitude range
Frequency10MHz
10MHz Frequency25MHz
2mVpp~20Vpp
2mVpp~5Vpp
Amplitude resolution
1 mV
Amplitude stability
±0.5%/5 h
Amplitude flatness
±5%(10 MHz)
Waveform output
Output impedance
50±10%(typical)
Protection
All signal outputs can work within 60s when the load is short-circuited
DC offset
Offset adjusting range
Output Amplitude>2V
-9.99V~9.99V
-2.5V~2.5V
-0.25V~0.25V
Offset resolution
0.01 V
Phase specifications
Phase adjusting range
0 ~ 359.9°
Phase resolution
0.1°
TTL/COMS Output
Low level
High level
1 - 10 V
Level rise/fall time
20ns
External measurement function
Frequency meter function
Frequency
measurement
range
1 Hz~100 MHz
Measurement accuracy
Gate time adjusted between 0.01S~10s
Counter function
Counting range
0-4294967295
Coupled mode
2 Coupling modes, DC and AC
Counting method
Manual operation
Input signal voltage range
2 20 Vpp
Pulse width measurement
0.01us (resolution), 20s (MAX measuring time)
Period measurement
0.01us (resolution), 20s (MAX measuring time)
Sweep function
Sweep channel
CH1 or CH2
Sweep type
Linear sweep, logarithmicsweep
Sweep time
0.1s~999.9s
Setting range
Arbitrarily set between start point and stop points
Sweep direction
Forward, backward and round trip
Bursting function
Number of pulses
1-1048575
Burst mode
Manual burst, CH2 burst, external burst (AC), external burst (DC)
General technical parameters
Display type
Display type
2.4 inch TFT color
Storage and load
Quantity
100 groups
Position
00 to 99(extract 00 place data at default boost state)
Arbitrary wave
Quantity
1 to 60, totally 60 groups (default boost 15 groups)
Interface
Interfacemode
USB to serial interface
Extension
interface
With TTL level mode serial interface for user secondary
development
Communication
speed
Adopt standard 115200 bps
Protocol
Using the command line,the protocol is made public
Power supply
Voltage range
DC 5 V±0.5 V
Manufacturing process
Surface-mount technology, large scale integrated circuit, high reliability, long service life
Prompt tone
Users can turn on or off by setting program
Operating characteristics
All key operations,knob continuous adjustment
Environmental
Package Included:
1 x DDS Signal Generator
1 x CD
1 x Power Adapter
1 x USB Data Cable
1 x BNC-BNC Cable
2 x BNC-Clip Cable
1 x Instruction Manual
Operation interface
Hostcomputersoftwarecontrolinterface
==========
Battery Included : No
High-concerned chemical : None
Model Number : JDS-6600-60M
Display Size : 2.9 Inches & Under
DIY Supplies : Electrical

Certification :
Single Frequency Range : 0-60MHz
Square Frequency Range : 0-25MHz
Triangle Frequency Range : 0-25MHz
Pulse Frequency Range : 0-6MHz
TTL Digital Frequency Range : 0~6 MHz
Arbitrary Wave Frequency Range : 0~6 MHz
Square Rise Time : 25nS
Display Size : 2.4 inch TFT Color
Power Supply : AC 110-240V
Channel : Dual Channels
Type : Digital Signal Generator
Depth : 2048*14bits
Storage Quantity : 60 groups
Coupling Mode : AC / DC
Sampling Rate : 266 MSa/s
Frequency Measuring Range : 1Hz~100MHz