Application Matters -- Test Road Surface: It should be ensured that it contains a flat surface with a length greater than 150mm and a width greater than 100mm to avoid affecting the measured values; Effective Range: Within the effective range of sliding of the rubber plate, there should be no obvious concave convex surfaces; Test Points -- On the test section, select five representative test points along the left wheelbase in the direction of travel, with each test point spaced approximately 2-4in/5-10m apart
Base -- This portable skid resistance tester it is composed of T-leg, leveling wire and leveling bubble, which can level and support the instrument
Column -- The pendulum friction tester is composed of column, lifting mechanism, guide rod and instrument handle, used for lifting and fixing the position of swing head
Release Switch -- A switch installed on the cantilever to maintain the horizontal position of the swing rod and release the effect of the pendulum falling
Steering System -- This pendulum tester includes fastening handle, swing shaft, steering knuckle and bearing, connecting pendulum and fixing position to ensure free swing in swing plane
Indicator System -- Including pointer felt ring, pressing cover, pointer adjusting nut and dial. The pointer can directly indicate the swing value
Swinging Head -- This pendulum testing tool is composed of upper and lower joints, swinging rod, spring, lever, lifting handle, hammer shell, sliding block and rubber sheet (76mm*25.4mm*6.35mm). It has specified moment for swinging center and specified pressure for road surface. The moment balance between front and back, left and right is the measure of road friction coefficient
Effective Range -- Within the effective range of sliding of the rubber plate, there should be no obvious concave convex surfaces
Test Points -- On the test section, select five representative test points along the left wheelbase in the direction of travel, with each test point spaced approximately 5-10m apart
Description
Notice:
This Pendulum Friction Tester doesn't include carrying case.
Parameters:
Usage: Abrasion Tester
Rocking torque: 615000g.mm
Pendulum mass: 1500g(3.3lb)
Pendulum center distance: 410mm (16.1inch)
Forward static pressure: from rubber sheet to pavement: 2263g(5lb)
Distance between rocking center to rubber sheet outer edge: 508mm(20inch)
Weight of the pendulum: 1500g(3.3lb)
Gravity moment of the pendulum: 410mm(16.1inch)
Scale distance: 508mm/20in
Shiping size: 31.10×30.51×13.19 in
Net weight: 33.44lb/15.2kg
Shipping weight: 60 lb/26kg
Packing list:
One set of Portable Pendulum Skid Resistance Tester
CP72 DC Voltmeter 72 * 72mm(DC20V)
KWD 31
10kv High Voltage Insulation Resistance Tester 10Kv Insulation Resistance Tester Kit for High-Capacity High-Voltage Strongly Induced Electrical with 10 Teraohms Resistance 10kv Voltage
KWD 286.500
AEMC 2130.59 Calibration Checker for Ground Testers, 25 Ohms Range
KWD 52
HC115 HC121 HC11D MPG Handwheel Handy Manual Pulse Generator for(HC115)
KWD 149
