【Specifications】
Surface Treatment: Injection Molding
Installation Type: Wall-mounted, Freestanding, Desktop
Drain Pipe Length: 60 cm
Each Pin Length: 13.8 cm
Each Pin Bottom Diameter: 1.1 cm
Each Pin Top Diameter: 0.73 cm
27 drippers: 550*400*120mm
Single-sided drip rack: 550*400*120mm, 27 drippers
Product configuration: Detachable drippers for easy use
Product colors: Gray, black, and white
【How to Install】
1.Attach the upper mounting clip to the wall with expansion screws.
2.Hang the mainboard on the mounting bracket and fix it with plastic fixing screws. (Note: please do not insert the plastic fixing screw insert first, insert the insert to fix it at the end when the installation is finished)
3.Install the middle and lower mounting clip. After finding a good position, first use expansion screws to fix it on the wall, and then use plastic fixing screws to fix it with the main board.
4.Install the bottom bracket. Find a good position and then put the expansion screws on the wall, then use the plastic fixing screws to fix it with the main board, and finally use the screws to fix it on the expansion screws (Note: Please choose 1 of the installation methods in steps 3 and 4. It cannot be installed at the same time. Before installation, please install the drip rods and drainage pipe.)