Please Carefully Check All Pictures and Part Numbers in the Listing to Make Sure It's the Correct Product you Need

Part Numbers: TES-593 TES 593R

Applications:
Compatible with High frequency RF electromagnetic wave field strength measurement Mobile phone base station antenna radiation power density measurement RF power measurement for transmitters Microwave oven leakage detection Personal living environment EMF safety

Package Includes: 1 x EMF Electrosmog Meter 10MHz to 8GHz

Specification:
Sensor Type: Electric field.
Frequency Range: 10MHz to 8GHz
Directional Characteristic: 10MHz to 8GHz Isotropic 3-Dimensional
Measurement Range: 20mV/m to 108.0V/m 53μA/m to 286.4mA/m 1μW/m2 to 30.93W/m2
Dynamic Range: Typical 75dB
Measurement Method : Digital, triaxial measurement
Measurement Range Selection: One continuous range
Display Resolution: 0.1mV/m, 0.1μA/m, 0.1μW/m2, 0.001μW/cm2
Setting Time: Typically 1s (0 to 90% of meas. value)
Display Refresh Rate: Typically 0.5 seconds
Display Type: LCD 4 digit
Measurement Units: mV/m, V/m, μA/m, mA/m, μW/m2, mW/m2, W/m2,μW/cm2, mW/cm2
Measurement Display Value: Instantaneous measured value, maximum value or maximum average value
Measurement Alarm Function: Adjustable threshold with ON/OFF
Measure Calibration Factor CAL: Adjustable
Manual DataMemory&Read Storage: 99 sets (only recall by meter)
Recharge Lithium-ion Battery: 3.6V, 1940 mAh | Charging time: Approx. 3 hours
Battery Operation Time: Approx. 10 hours
Dimensions: Approx. 67(W) x 60(T) x 247 (L)mm
Accessories: Instruction manual, Rechargeable Lithium-ion battery, Carrying case, AC adaptor DC 5V 1.5A

Please Check The Part Number Before Purchasing To Ensure Fitment.

Built To Strict Quality Standards And Use Superior Quality Parts