مميزات خاصة

Aligning Clutch Components Precisely: Employing this clutch alignment tool enables the clutch disc and pressure plate to be centered correctly against the flywheel. The tool acts as a guide to keep the parts in a straight orientation, making the final fastening step more efficient and less prone to misalignment
Single-Disc Compatibility Advisory: This car alignment tool kit is designed to work with single-disc clutch assemblies common to most passenger vehicles and light trucks. It is not compatible with dual-disc setups. Please verify your vehicle's clutch configuration before making a ordering decision
PVC Body for Long-Term Durability: The clutch adjustment tool uses PVC as its primary construction material. PVC resists the formation of rust even after repeated contact with water or high humidity. This characteristic allows the tool to maintain its appearance and function through many uses over the years
Included Items and Dimensions: The package contains one clutch alignment tool and two expansion cone clips. The tool measures 5.1 inches in length by 2.84 inches in width by 2.84 inches in height. To change a cone clip, back off the top knob, reduce the threaded rod, and pull out the long adjusting screw
Procedure for Tool Setup: Install the suitable expansion cone clip onto the clutch alignment tool. Position the clutch disc together with the pressure plate and insert the tool's shaft into the central opening. Tighten the upper knob first, then tighten the lower knob to hold everything in alignment

وصف

Straight Shaft, Solid Hold, Excellent Clutch Fit, Every Time

Product Attributes
Colors: Black
Sizes: 5.1*2.84*2.84 inch
Weight: 4.4 oz
Material: PVC
Packaging: Car Clutch Alignment Tool*1, Expansion Cone Clip*2
Package Size: 7.99*5.56*2.74 inch

Product Installation
Replace The Expansion Cone Clip:
1. Loosen top knob
2. Disassemble threaded post
3. Take out long adjusting screw
4. Replace the expansion cone clip with the appropriate one

Alignment Work:
1. Select the applicable expansion cone clamp and install it on the clutch alignment tool
2. Place the clutch disc and pressure plate together and insert the clutch alignment tool in the hole
3. Tighten the knob at the top first, then the knob at the bottom

Product Functions & Features
1. Compatible with single-disc clutch systems commonly found in passenger cars and light trucks. Not intended for vehicles with dual-disc clutch setups. Check your owner's manual or existing parts before ordering
2. PVC construction avoids the rust issues associated with metal tools. It maintains its shape and function even after contact with water or storage in damp environments

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه