مميزات خاصة

FIT 2023 2024 2025 Toyota Prius and Prius Prime, including Hybrid, PHEV, and AWD-e models. This Front Bumper Lamp Assembly is specifically engineered for the 5th generation Prius chassis geometry. Position: Front Left (Driver Side) and Front Right (Passenger Side). Please verify OE 812A0-47030 and 812B0-47030 for precise integration.
LED Daytime Running Lamp and Front Bumper Signal Light utilizing integrated high-output LED chips with a pre-installed internal heat sink. The optical-grade polycarbonate lens is treated for environmental exposure to maintain clarity and structural integrity against UV radiation. Features a dual-color output: White DRL and Sequential Amber Signal.
This Front Bumper DRL Assembly addresses excessive moisture intrusion or flickering issues found in damaged factory units. It restores factory-matching lighting geometry and illumination patterns. The internal circuitry is engineered to maintain proper voltage resistance within the vehicle electronic control system.
Direct-fit integration requiring the use of the included specialized wiring harness for electrical synchronization. This LED Running Lamp assembly requires a specific wiring sequence: Ground (Black), DRL Positive (Red), and Signal Positive (Yellow). Integrated mounting tabs ensure a gap-free interface with the OE bumper fascia.
Tested for thermal cycling and high-pressure water resistance to ensure sealing integrity. Installation Limit: Professional electrical integration is recommended due to the non-plug-and-play wiring requirement. Disclaimer: This is an aftermarket replacement part designed for aesthetic restoration and is a non-electrical diagnostic component.

وصف

Vehicle Compatibility Matrix:
2023-2025 FIT Toyota Prius (All Trims) LED Daytime Running Lamp
2023-2025 FIT Toyota Prius Prime (PHEV) LED Daytime Running Lamp
2023-2025 FIT Toyota Prius AWD-e LED Daytime Running Lamp
Replaces OE Parts: 812A0-47030, 812B0-47030, TO2563109, TO2562109.
Physical Specifications:
- Light Source: Integrated LED (Pre-installed, Non-removable)
- Lens Material: High-Transparency Polycarbonate
- Signal Function: Sequential Dynamic Amber Flash
- DRL Function: 6000K Cool White
Wiring Compliance & Installation Protocol:
1. Wiring Requirement: This assembly uses a custom harness (Included). Terminal connection to existing circuits is required.
2. Black Wire: Ground (Connect to chassis or battery negative).
3. Red Wire: Connect to the positive terminal of the factory DRL or ACC circuit.
4. Yellow Wire: Connect to the positive terminal of the factory Turn Signal circuit.
5. Verification: Test all lighting modes (White DRL/Amber Signal) before finalizing bumper re-assembly.
Resistance Standards:
Treated for salt spray endurance and tested for high-temperature thermal resistance. This component is designed to restore factory lighting characteristics and provide aesthetic restoration.

مرحبًا،

بحث

مصباح LED للجري النهاري والمصد الأمامي مجموعة ضوء إشارة الانعطاف FIT 2023 2024 2025 Toyota Prius Prius Prime، LED DRL متكامل مع إشارة كهرمان متتابعة، استبدال

مميزات خاصة

وصف

منتجات شبيهه