Stationary Pedestal Seat MountAdjustable: Tilt and Height16-Gauge SteelFinish: BlackFor 1 SeatIncludes
(4) 13 in. L x 2 in. W x 2 in. H Brackets(4) Bolts(4) Flat Washers(4) Prevailing Torque Nuts JEGS 70225Make assembling your interior easy with the stationary pedestal seat mount from JEGS. The predrilled holes let you determine the height and angle. To allow for universal fitment holes are not drilled for the seat or floor mount. The included hardware is for bracket assembly only. Additional hardware will be necessary for installation. Make sure to measure the distance between mounting holes to ensure they fit the 13 in. long by 2 in. wide bracket. This kit is for 1 seat. FeaturesMounting Hardware: 1/4 in. -28Prevailing torque nuts are single-use lock nutsCannot use lowest mounting holes when in a C-orientationAssembled heights:Minimum (Z-orientation): 2 in.Minimum (C-orientation): 2 1/2 in.Maximum (Both orientations): 3 in.Tilt and height adjustments: 1/2 in. incrementsNote: Holes must be drilled for installation. Brackets may not be returned once holes have been drilled in them.