Features:
- Modular front and rear shock towers (FRONT: 8mm of upward/downward adjustability, REAR: can accommodate links ranging from 69-105mm+)
- Dynamic skid angle (17-20 degrees. As the rear tower extends, it also steepens the skid angle. This means that increasing rear link length proportionally increases your skid angle as well)
- Flexible wheelbase, easily switch between short and stretched wheelbase configurations
- Adjustable delrin rear electronics tray
- Magnicorn mounts
- Updated delrin skid to reduce hang-up
- Redesigned delrin front brace/battery tray
- Closer hole spacing on front shock tower for more fine-tuning

Chassis Kit Includes:
- 2x Carbon fiber chassis rail sets (top, base and rear pieces)
- 2x Delrin sliders
- 1x Delrin skid
- 1x Delrin front chassis brace
- 1x Delrin rear adjustable tray
- 2x Mangnicorn mounts
- 8x 6mm magnets
- 20x M1.4*6 screws

CAPABILITY: 7.5/10
BUILD DIFFICULTY: 7/10
VERSATILITY: 8.5/10
BOA COMPATIBILITY: 2.5/10
CARRIER BEARING COMPATIBILITY: 9/10

NOTES:
This chassis is best suited for experienced builders- not recommended for first timers (although you can try!) There are a multitude of ways to set this chassis up. I recommend 45mm-50mm front links (45s if you run a smaller tire, 50s if you run 62mm+). Recommended carrier bearing use with links 85mm+ in the rear.