💖High stability & Measurement accuracy Made of 99.9% high-purity copper, it ensures the stability of the half-cell potential. Compared to the saturated calomel electrode (SCE), the potential difference is stable at 70 ± 3 mV, and the potential difference between electrodes is ≤ ± 1 mV. It has strong anti-polarization performance, providing you with accurate and reliable corrosion potential measurement data.
💖Durable & With Visible Window Design Designed specifically for field operations, the casing is made of high-strength transparent organic glass, which is impact-resistant and resistant to aging. The transparent window design enables you to observe the saturation of the copper sulfate solution inside at any time, ensuring measurement accuracy without the need for frequent disassembly and inspection.
💖Multi-scenario application & rapid response Suitable for corrosion potential measurement of buried pipelines, tank bottom plates, and concrete structures (reinforced steel). It can operate stably in soil, fresh water, and humid environments. The porous ceramic liquid interface provides a stable ion flow path, with rapid response and good data repeatability.
💖Ready-to-use & Easy Maintenance Standard 1.5-meter shielding connection cable, effectively resisting interference. The SE-1 electrode body can be reused for a long time. Only regular replacement of the internal solution and copper sulfate powder is required. Combined with the CCT portable copper sulfate powder, precise proportioning, making maintenance much easier.
💖The set includes & portable packaging The set contains: · 1 × SE-1 portable copper sulfate reference electrode body · 1 × 1.5-meter shielded cable (with crocodile clips) · 1 × CCT portable copper sulfate powder (satisfying the requirements for initial filling and subsequent maintenance)
وصف
✨Product Introduction The SE-1 Portable Copper Sulfate Reference Electrode (CSE) is an essential tool for on-site cathodic protection detection. It is widely used in petrochemical pipelines, urban gas networks, large storage tanks, and concrete structures for corrosion monitoring. This kit specifically includes CCT Portable Copper Sulfate Powder, which solves the problem of subsequent consumable material procurement for you and ensures that the electrode is always in the optimal working state of saturated copper sulfate solution.
✨Technical parameters:Technical parameters:
✨· Model: SE-1
✨ · Type: Saturated copper/sulfate copper electrode (Cu/CuSO4)
✨ · Potential relative to SCE: 70 ± 3 mV (standard conditions)
✨ · Internal resistance: ≤ 3 KΩ
✨ · Operating temperature range: -15°C to +55°C
✨ · Dimensions: Approximately Φ30mm × 150mm
✨ · Shell material: Transparent organic glass
✨ · Liquid interface: Highly transparent porous ceramic / cork stopper.
✨Instruction Manual
✨ 1. Activation Electrode: Open the upper cover, pour the CCT portable copper sulfate powder into the electrode chamber, add distilled water to submerge the copper rod approximately 2 cm, tighten the upper cover and shake well to ensure thorough mixing, then let it stand until the powder dissolves to form a saturated solution.
✨ 2. Test Preparation: Immerse the porous ceramic head in water for a short while to enhance conductivity.
✨ 3. Connection and Measurement: Connect the black clamp to the negative terminal of the voltmeter, the red clamp to the tested structure (pipe/steel bar), press the electrode ceramic head firmly onto the moist soil or concrete surface, and read the stable value.
✨ 4. After Use: Clean the ceramic head, cover it with a protective cover, place it vertically or at an angle (with the ceramic head facing down), and avoid backflow of the solution.
✨Packaging List
✨ · SE-1 electrode body: 1 piece
✨ · Shielding cable (with clips): 1 cable
✨ · CCT copper sulfate powder: 1 bottle
✨ · Instruction manual: 1 copy
✨ · Portable storage bag: 1 unit