Usage Step:
1. Confirm that the battery(Not included) is installed normally and does not need to be replaced.
Test: Turn the switch on and adjust it to 1, slowly press the pressure test button 3 times. When the LED light is green, the snoring stop is normal
2. Open the conductive patch, and stick it on the back of the snoring device.
3. Install the snoring device clasp, or you can omit this step and install the strap directly.
4. Turn on the snoring device switch, and adjust the appropriate mode.
5. This anti-snoring device has 1-7 anti-snoring modes, sensitivity differs from person to person. Please choose the intensity suitable for you.
Common Troubleshooting Steps:
Cannot power on:
Confirm battery polarity is correct.
Replace with a new battery.
Press and hold the power button for 2-3 seconds.
No effect:
Ensure product is worn correctly.
Clean product contacts.
Test by switching modes.
Continuous snoring:
Clean internal dust.
Replace battery.
Restart device.
Specification:
Material: ABS
Weight: 0.2kg
Packing size: 75*100*22MM
Package Include:
1 x Anti Snoring Wristband Device
Please Note:
If skin irritation or allergies occur during use, stop using it immediately. It is not suitable for people with a pacemaker or another implant with electronic components.