Search

Search

Home / L.E. Wilson / Dimensional Measurement
Case Length Headspace Gauge 7.62x39mm in Kuwait Case Length Headspace Gauge 7.62x39mm in Kuwait

Case Length Headspace Gauge 7.62x39mm

KWD 20.500
Brand
L.E. Wilson
Weight
159 g
– 1 +

Special Features

  • This is a one-piece, non-adjustable cylinder-type gauge for checking fired and resized cartridge cas
  • Used to compare cartridges against the minimum and maximum SAAMI cartridge dimensions
  • The item description will indicate if the headspace gauge is Adjustable
  • Drop a fired case into the gauge. Take a measurement on headspace.
  • Now once the initial measurement is taken, slowly dial in the full length sizer until there is a 0.

Description

The Cartridge Case Gage was designed with safety in mind and was invented by our founder Sam (L.E.) Wilson in 1935 after a fellow shooter approached him for help in solving a case-separation issue. The gage allows you to see just how much you are sizing back your shoulder on your cases. This is best done by measuring a case in AS-FIRED condition. Take a measurement. Then place back in the gage to see just how much you are sizing the shoulder back. Finally, adjust sizing die accordingly. After sizing your cases, there is a good chance the brass will lengthen. The gage will also check min/max case length and will point out the need for case trimming. This is an essential tool for every reloaded.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}